

Add to Cart
Dual Power Source Automatic Cut - in Equipment Gas Insulated Metal - clad Switchgear
Overview:
In order to meet the increasing demand for reliability of power
supply , we have developed a new generation of dual power supply
Automatic Cut - in Equipment . It can make intelligent judgement
according to the state and load state of the main power supply, and
automatically switch it so that realize the reconfiguration of
distribution network and improve the reliability of power supply.
Product features:
1. Reliable mechanical design ensures that the two power supply
will not be closed, and has very high safety and reliability.
2. It can automatically select the main power supply and standby
power supply, and automatically switch to the standby power supply
when the main power supply is out of power or under pressure.
3. The state of the main power supply and the load condition can be
judged intelligently, and the best switching time can be selected
to switch the power supply to improve the stability of the system
operation.
4.The PT sampling power interface can be reserved in the gas tank,
and the power supply of the operation mechanism can be powered by
two sides of the PT.
5. fully insulated and fully enclosed structure, high safety and
complete operation.
Technical Parameters
S/N | Item | Unit | Parameters | |
1 | Rated Voltage | kV | 12 | |
2 | Rated Frequency | Hz | 50 | |
3 | Rated Main Circuit Current | A | 630 | |
4 |
| A | 630 | |
5 | Rated short circuit Making Current(Peak) | kA | 50 | |
6 | Rated short time withstand Current(4s) | KA | 20 | |
7 | Rated peak withstand curent | KA | 50 | |
8 | 1min Power frequency withstand voltage (phase to phase/ phase-to-ground/chasm) | kA | 42/42/48 | |
9 | lightning impulse withstand voltage >(phase to phase/ phase-to-ground/chasm) > | KA | 75/75/85 | |
10 | Mechanical life | Times | 5000 |