Bags Vibration Abrasion Durability Testing Machine For Luggage Trolley Wheel

Bags Vibration Abrasion Durability Testing Machine For Luggage Trolley Wheel

Bags Vibration Abrasion Durability Testing Machine For Luggage Trolley Wheel

Use Description

Testing Machine For Luggage Trolley Wheel use to test any luggage, baggage, suitcase or stroller, trolley which attach with road wheel, to test the material, abrasion and damage deformation of wheel, and the test results can be a reference to improve road wheel.The tester is simulating walking of luggage subject to abrasion and vibration from ground, check quality of travelling wheel, axle, wheel stand, draw bar and the main box.The testing result can be preference to improve the products.The luggage is carried specific load.Start the wheel roller walking tester. The roller will rotate, and conflict and impact with travelling wheel of luggage, create shock vibration and abrasion.

Bags Vibration Abrasion Testing Machine Specifications :

Basic load: the basic load in the luggage is according to the following table , (unit : kg )

Testing Steps For Bags Vibration Abrasion Durability Testing Machine :

1.As stipulated in the table will tie all pull out, and the pull rod connected to the enclosure, inclusion of expansion joints in the other 8 kg load, loading the rod to hang on the supporting frame, adjust the tie rod and the level Angle to 45 ° plus or minus 2 °;No load is required for bags with trolley without pull rod.
2. Adjusted speed: the test requires 4km/hour.Adjust the upper right knob of the panel to reduce the left rotation speed and increase the speed range to 0 ~ 5 km/h.
20% (1.5km /h), 50% (2.5km/h) and 100% (5km/h).
Requirements for the wear-resistant and shock-resistant performance of the walking wheel pull rod: the test was conducted under the specified loading conditions, and the qualified products were tested continuously for 8km, while the excellent products were tested for 12 km.
3. Set time: 0 ~ 999.9 hours.Press [RST] to return to zero at any time and press [START] to retime.
Setting of timer: press "set" to enter the preset value change state, and the number flicker is the value to be changed. "low" and "low" are the increase and increase of the number
Delta theta is the displacement key.After setting, press MD key to exit the setting screen.
4. Retest: when retest, press the timer RST key to return to zero before starting again.
5. Test process: pay attention to whether the wheel is damaged or the belt will be damaged.
6. Test results: after the test, the running wheel has flexible rotation, no resistance and deformation;No deformation cracking of wheel frame and axle;Wheel wear is not greater
2 ㎜.Inspect trunk and wheels for damage and record.

Luggage Walk Test machine Picture :

Perfect International Instruments Co.,Ltd, the excellent supplier of global testing machine and related services, was founded in 1997 ,Taiwan .Then, Dongguan factory was founded in 2003. It has been providing quality improvement solutions for rubber, plastics, footwear, food, daily chemical, paper, color printing packaging, suitcase handbags, electronic wire, textile, sports equipment, biochemical, pharmaceutical, household appliances, office equipment, aviation, aerospace, as well as the colleges and universities, research institute and other customers from area of scientific research and development.

Perfect International Instruments Co.,Ltd, mainly focus on research, manufacture and sales in Tensile Testing Machine, Universal Testing machine,Hydraulic Compression Testing Machine,Tensile Strength Tester Environmental Test Chamber,Temperature Humidity Test Chamber,Aging Oven, Hot Air Drying Oven,Salt Spray Chamber,Adhesive Tape Tester,Luggage Suitcase and Bags Test Equipment . The products meet UL, ASTM, JIS, GB, ISO, TAPPI, EN, BS...and other domestic and international standards.

Perfect Instruments has accumulated over 20 years of technology and experience, and has obtained more than dozens of patents, such as invention, utility model and appearance.Since 1997 into the domestic development, gradually for the adhesive testing industry, paper packaging industry, cosmetics, food and beverage, bags handbags and other industries to import foreign advanced quality detection technology and international advanced technology of detecting instrument.

Our ideal : To provide customers with the best solution to improve the quality of products, eliminate the defects of all products and use hidden dangers, and pursue to improve the quality of human life！