150 X 150 Mm 3.0 Mm Reinforcing Concrete Mesh Integral Concrete Structures Component

The reinforcing steel mesh has become an integral component of reinforced concrete structures and is used to enhance them.

1) Introductions of the galvanized welded wire mesh:
Welded wire mesh is galvanized before or after welding, having good corrosive resistance and qualities which are not usually found in average wire mesh.
Materials : Low carbon steel wire , black wire or galvanized wire, stainless steel wire ect.
Processing: Galvanized after welding, Galvanized before welding
Finishing: Black, electro-galvanized before or after welding, hot-dipped galvanized before or after welding, PVC coated

Features of our concrete reinforcing mesh

• The welded wire fabric makes them easier to work on.
• There are different diameters of steel reinforcing mesh each suited for a particular application.
• There are different designs of steel reinforcing mesh from bent and rolls to flat sheets.
• As per BS 4482 standards and codes, the stainless steel wire used in the manufacture of the
  steel reinforcing mesh has a 510MPa tensile strength and 485MPa minimum proof stress.
• The steel reinforcing mesh is rigid making it possible for you to control concrete cover during
  construction.
• Manufacturers produce steel reinforcing mesh under SANS1024 Standard Specifications.
• The steel bars stay intact whenever immersed in concrete because they are carefully welded
  in mats.
• You don’t have to apply additional surface treatment to the steel reinforcing mesh before
  use.
• Less field labor needed when making reinforced concrete slabs using this mesh thus
  drastically speeding up the construction process.
• The mesh is easy to load and unload, and easy to handle at the working site.
• Properly mixed concrete is poured into the mesh and then given time to dry out. The
  concrete, as it continues to dry out, it grips the steel bars tightly creating a bond stress
  between these two materials. This bond stress is essential because it reduces bending and
  makes reinforced concrete slabs stronger.

Bar Spacing, Sectional areas per metre

Mass per square metre for bars in one direction at various spacings (kg/m²)

Trench Mesh:

Trench mesh is long, narrow sheets of concrete reinforcing mesh, ideally sizes for trenches, paths or other narrow spaces.

Trench mesh common uses include rock walls, brick walls and house footings and used specifically for residential footing trenches.

Trench mesh made from grade D500L ribbed reinforcing wire including main wire and cross wire. Its longitudinal wires (main wire) from 7.6 mm up to 15.6 mm diameter, and cross wire in 4 mm or 4.77 mm diameter.

The trench rib mesh products all come 6.0 m longs with a variety of standard widths from 200 mm to 500 mm.

Black welded wire mesh rolls

Black welded wire mesh rolls

Black welded wire mesh rolls

Black welded wire mesh rolls

galvanized welded wire mesh rolls