

Add to Cart
High Performance DTH Drilling Tools DHD360 Down The Hole Hammers
And Bits
Product description
DTH hammer is used for drilling holes through a wide range of rock
types, the variety of which continues to extend well beyond the
original conception of early blast hole drilling.
Down-the-Hole refers to where the hammer action occurs when
compared to drifter hammers, which hammer on top of the drill
string. The DTH hammer piston always makes direct contact with the
drill bit and there is generally no loss of transmitted energy as
the hammer drills deeper, as is the case with drifter (top hammer)
rigs.
Down-the-hole (DTH) hammer bits are used with Down-the-hole hammers
for drilling holes through a wide range of rocks types. In
conjunction with DTH hammers, drill hammer bits are designed with a
splined drive for rotating the bit in the ground. Drill bits are
available in different sizes and different styles so they can drill
a wide range of hole sizes. Our variety of Down the Hole (DTH) bits
is manufactured using high quality materials to provide you with a
fine balance between penetration capability and bit life. We offer
a comprehensive range of standard and made to order drill bits on
an extensive selection of shanks with a wide variety of head
designs to suit every project.
DHD360 hammer
shank | DHD360/COP64 |
Length(less bit) | 1248mm |
External diameter | 148mm |
Top sub thread | API 3 1/2”REG |
Weight(less bit) | 100kg |
Hole range | 155mm-190mm |
Working pressure | 1.0-2. 5Mpa |
Impact rate at 1.4Mpa | 23Hz |
Recommended rotation speed | 20-30r/min |
1.0Mpa | 10m³/min |
Air consumption 1.8Mpa | 20m³/min |
2.4Mpa | 28.5m³/min |
DHD360 DTH bit
Bit diameter | Flushing holes | No.*Button Dia. |
|
| ||
mm | inch | Gauge Buttons | Front Buttons | |||
152 | 6” | 2*Ф26 | 8*Ф18 | 4*Ф16+4*Ф14 | 23 | HD65-152 |
156 | 6 1/8” | 2*Ф26 | 8*Ф18 | 4*Ф16+4*Ф14 | 23.5 | HD65-156 |
160 | 6 5/16” | 2*Ф26 | 8*Ф18 | 4*Ф16+4*Ф14 | 23.5 | HD65-160 |
165 | 6 1/2” | 2*Ф26 | 8*Ф18 | 8*Ф16 | 24 | HD65-165 |
171 | 6 3/4” | 2*Ф26 | 8*Ф18 | 10*Ф16 | 25 | HD65-171 |
185 | 7 1/4” | 3*Ф22 | 9*Ф18 | 10*Ф16 | 27 | HD65-185 |
190 | 7 1/2” | 2*Ф26 | 10*Ф18 | 13*Ф16 | 28 | HD65-190 |
203 | 8” | 2*Ф26 | 10*Ф18 | 14*Ф16 | 31 | HD65-203 |
Product features
DTH hammer:
Valveless air distribution. More reliable.
Simple design of the piston. Long life.
More efficient energy transfer, fact drilling speed, lower air
consumption and lower oil consumption.
Fewer internal parts, simple structure, long life, less failure and
easier to maintain because all the parts are heat treated.
Easy to disassemble because the top sub, the drive chuck and the
external cylinder are connected by multi-step thread.
DTH bit:
Strict quality controlling
Selected high quality special steels and carbide
Produced by CNC machines
Simple and reasonable design, Low problem rate
Low air consumption, smooth drilling, Maximum impact power, High
penetration rate
Product application
At present, DTH drilling tool is widely used in underground mining,
quarries, hydraulic and Hydro-Power Engineering, water well
drilling, Mineral exploration, anchoring hole drilling, geothermal
engineering, Subway excavation, another civil engineering. it has
the advantage of high flatness, smooth hole wall, high rigid of
drill rod and hammer, independent of high axial thrust, no limit of
drilling depth, low cost of devices and easiness to maintain. At
the drilling hole of dia.105mm-dia.254mm, a plenty of the DTH
drilling tools are used.
Packaging and shipping
Packaging: carton+plywood case, or as your special request.
Shipping: By air, by sea, by express.
Detailed pictures