Electric Driven Injection Blow Molding Machine Safe Operating With One Heating Oven
Brand Name:Jinyate
Certification:CE,ISO,SGS
Model Number:HY-B-I
Minimum Order Quantity:1 Set/Sets
Delivery Time:30 working days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Active Member
Address:
No.198,Zhenbei Road, Leyu Town, Zhangjiagang City
Supplier`s last login times:
within 42 hours
Product Details
Company Profile
Product Details
Semi-Auto Bottle Blowing Machine With One Heating Oven And Two
Blowing Machine
HY-B-I semi-automatic bottle blow molding machine
Specification:
1. This semi-automatic bottle blow molding machine is suitable for producing PET plastic containers and
bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water, carbonated
drink bottle, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.
2. Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to
heat the perform ,the perform rotated and heated equally.
3. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the
different requirements for the action and blow .It can provide sufficient and steady high pressure for
blowing large irregular shaped bottles.
4. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the
machine.
5. The machine can be operated in the step-by-step mode and the semi-auto mode.
The machine is small with low investment, easy and safe to operate.
Technical parameter
| Name | Item | Unit | Details |
| Blowing machine | Dimension | mm | 1500*600*1750mm |
| Bottle volume (max) | ml | 2000 | |
| Bottle volume (min) | ml | 50 | |
| Bottle Neck Diameter (max) | mm | 40 | |
| Bottle Neck Diameter (min) | mm | 18 | |
| Body Diameter (max) | mm | 125 | |
| Body Height( max) | mm | 420 | |
| Number of Cavities | mold | 2 | |
| Production output | pcs/h | 800-1000BPH | |
| Clamping force | T | 5.7(56KN) | |
| Mold thickness | mm | 200(max) | |
| Mold width | mm | 360x390 | |
| Space between Tie-bars | mm | 120-220 | |
| Diameter of Tie-bars | mm | 63 | |
| Scope of Tie-bars | mm | 405 | |
| Mold stroke | mm | 160 | |
| Stretching stroke (max) | mm | 420 | |
| Working pressure | Mpa | 0.8-1.0Mpa | |
| Blowing pressure | Mpa | 2.0-3.0Mpa | |
| Voltage/Power | V/KW | 220V/1KW | |
Pre-heater | Dimension | mm | 1870*630*1450mm |
| Weight | kg | 260 | |
| Voltage/Power | V/KW | 380V/14KW |
Air cold dryer
| Flow capacity | 1.0m³/min |
| W.P | 3.0Mpa |
| Inlet temperature | ≤80℃ |
| Dew point | 23℃ |
| Ambient temperature | ≤38℃ |
| Power supply | 380V/50HZ |
| Compressor power | 0.75kw |
| Cold medium | R22 |
Bottle design
Electric Driven Injection Blow Molding Machine Safe Operating With One Heating Oven
Inquiry Cart
0