Product Details
Double Conversion High Frequency Online UPS With EPO PFC And
Compact Design
Application:
Network, micro data center, PC
Key Features:
- Its cut-edge digital technology of DSP (Digital Signal Processor),
can greatly improve the products performance. and system
reliability, and deliver a compact integration with higher power
density;
- Output power factor up to 0.8 - applicable to the tendency of
future load evolution, and deliver higher payload capacity;
- Total power factor up to 90% can minimize the power loss of UPS and
save utilization cost for user;
- Emergency Power Off (EPO): UPS can be instantly shut off in case of
any emergency;
- Compliance with EMC requirements of IEC61000-4,provide your device
a clean electric environment.
- Active power factor correction (PFC) technology, allows the input
power factor approaching to 1, dramatically reducing the immunity
on utility grid;
- Excellent input frequency range makes UPS suitable to different
power supply devices, i.e. generator set;
- Parallel Kit: realize the parallel extension and redundancy
function, offer more flexibility and safety for user's power supply
planning;
- Compact Design, Lower Noise;
Product brief introduction:
CNH310 10-20KVA adopts the double conversion online architecture
ideal for resolving all issues on power supply. This
state-of-the-art solution is especially designed for eliminating
the power loss, extra high or low voltage of utility power, voltage
sags or damped oscillation, high-voltage pulse, voltage
fluctuation, surge voltage, harmonic distortion, clutter immunity,
and frequency fluctuation etc., delivery safely and reliable power
supply to guarantee for user's load.
Rich Communication and Monitoring:
Provide RS232,USB interface and communication cable for local or
remote power supply management;
User-friendly interface:
LCD display accurate UPS working environment, through the LCD
display panel UPS can be set output voltage and frequency, ECO
mode.
Intelligent battery management:
- With advanced intelligent charge control mode, UPS can
automatically select the optimal charge mode as per the battery
type and conditions, thus further maximizing the lifespan of
battery bank.In additional, the system can periodically conduct the
charge & discharge management for the battery bank. User also
can select the battery voltage (192V or 240V) on demands.
- The user can query and set the proper UPS control parameters for
intelligent UPS management; automatically identify and adapt to
50/60Hz power supply system, fulfilling the requirements in various
power supply systems;
- Perfect failure protection and alarm function: provide complete
failure protection and clear alarm notification function in case of
I/O over-voltage or under-voltage, battery overcharge or
under-voltage, overload, and short circuit.
Intelligent Power monitoring and Management Software WinPower 2003
:
Support:
- Microsoft Windows95/Me/NT/2000/XP/Unux operating system. Suit for
TCP/IP local area network;
- TCP/IP network monitoring
- Support timing boot up / shut off UPS function;
- Timing UPS self-test function;
- Graphically displayed UPS status function in real time;
- Network to deactivate the function of multiple servers and
workstations;
- Abnormal power;
- Shut off most of the applications and the preservation of related
document;
- Online help function; with data records(including mains, UPS, load,
battery), and event function, to convenient for the routine
maintenance.
Technical specifications:
Model | CNH310 10-20KVA |
10K | 10KS | 15KS | 20KS |
Capacity | 10KVA/8000W | 15KVA/12000W | 20KVA/160000W |
Nominal Voltage | 380/400/415VAC 3phase 4wire+G |
Input |
Voltage Range | 208~476VAC |
Frequency Range | 50HZ: (46~54HZ); 60HZ:(56HZ~64HZ) |
Power Factor | > 0.98 | 0.99 |
Output | |
Voltage Precision | 208/220/230/240X(1±2%)VAC |
Frequency Precision | 50/60Hz±0.05Hz |
Power Factor | 0.8/0.9(Optional) |
Harmonic Distortion | Linear load<3% Non-linear<6% |
Overload Capacity | 105% < load ≤125% for 60s;125% < load ≤150% for 30s;load
>150% for 0.5s. |
Current Crest Ratio | 3:1 |
Transfer Time | 0 ms(AC mode↔DC mode);(AC mode↔Bypass<4ms) |
Battery |
DC Voltage | 192VDC or 240VDC(Optional) |
Charging Current | 2A | 4A |
Panel Display |
LCD | UPS status, input/output voltage and frequency, battery voltage,
capacity, load temperature, history records, adjust voltage, ECO
mode |
Communication |
Communication port | RS232, SNMP Card(Optional),USB port(Optional),AS400(Optional) |
Working Environment |
Temperature | 0ºC~40ºC |
Relative Humidity | 0~95%(Non-condensing) |
Storage Temperature | -25ºC~55ºC |
Elevation | 1500 m |
Noise Level | <55dB |
Weight | N.W | 20 | 35 | 35 |
G.W | 24 | 39 | 39 |
Dimension: (W*D*H mm) | 248*500*672 | 248*500*616 |
Why Choose Us?
We have experienced team for more ten years and high-tech equipment.
Our products is with ICE, ISO and Chinese TLC
We can make product according to your requirements, such as your
size, color, design, and your logo.
We can offer you very competitive price.
You can get expert guides from us all the time.
Company Profile
Shenzhen CONSNANT Technology Co., Ltd. (simple name: CONSNANT) is a
professional manufacturer engaged in research, development and
production of UPS (Uninterruptible Power Supply) including the
Modular UPS, Outdoor & Indoor UPS,Industrial special UPS, Low
Frequency & High Frequency Online UPS and Solar Power System
both for home appliance and telecom equipments.
Our product has obtained the CE, ISO 9001, ISO 14001 and local
Chinese TLC certificates. Having reached good sales results in
China, we are now expanding our sales overseas.
We are proud of the fact that most of our company’s engineering
staff is well-qualified and has gained experience in relevant
fields more than 10 years. In order to protect your equipment from
electrical supply network instability, we offer innovative
solutions that obtain higher availability systems, improve
efficiency and offer flexible solutions to meet specific needs and
range of application. The UPS product is widely used in data and
computing centers, finance institutions, banks, within industry and
medical fields.
We welcome any kind of collaboration, will enjoy any opportunities
of dealing with new costumers: from distributors to ultimate
consumers, undertake both wholesale and retail orders, including
the sale of finished goods or parts.
If you start work with us, you will not only get high-quality
product at reasonable price, but also maintain the profitable
conditions for further years.
We are located in the world-famous High-Tech center – Shenzhen
city, China. Our factory is close to airport. If you are lucky to
visit the city, you are kindly welcomed to visit our factory.





