Hydraulic Power 5.5kw PLC Control Box Step Roof Tile&Glazed Tile Forming Machine

5.5kw Glazed Tile Forming Machine , High Speed Roof Tile Manufacturing Machine

machine picture

Quick Detail

1.Suitable to process: Color steel plate

2.Width of the plate: 914mm

3.Rollers: 18rows

4.Dimensions: 9.4*1.55*1.91m

5.Power: 4+4kw

6.Thickness of the plate:0.3-0.7mm

7.Diameter of the roller:Φ70mm

8.Weight: About 5T

9.Voltage: 380V 50Hz 3phases

10.Hydraulic: 40#

11.Processing precision: Within 1.00mm

12.Control system: PLC control

Specification

1. The oil pump can not start, manual can not work:

(1) The zero line is not fixed. The voltmeter shows more than 200V normal, and more than 200V is a zero line fault.

(2) The emergency stop button is locked. Rotate clockwise to release.

2. The oil pump can be started and cannot be manually operated: The hand auto button is not in the manual position or it is damaged.

3. Manually normal, but no automatic:

(1) The automatic hand knob is not in the automatic position or is damaged. The start button is damaged.

(2) The knife is not reversed at the upper limit or upper and lower limits.

(3) The mold is not reversed at the upper limit or upper and lower limits.

(4) Data setting error.

4. The knife keeps going up and the pump is blocked:

(1) The upper limit is improperly adjusted or the switch is damaged. .

(2) K1 and K2 are reversed.

(3) The solenoid valve is stuck. Turn off the oil pump and press the knife to cut off the knife. When you hear the sound of “click”, turn on the pump and raise the knife to the upper limit position.

5. The knife keeps moving downwards and holds the pump:

(1) The adjustment of the lower limit is improper or the switch is damaged.

(2) The solenoid valve is stuck. Turn off the oil pump, and press the knife to cut off the knife. When you hear the “click” sound, turn on the pump to raise the knife to the upper limit position.

6. The mold keeps going upwards and holds the oil pump:

(1) The upper limit is improperly adjusted or the switch is damaged.

(2) K3 and K4 reversed.

(3) The solenoid valve is stuck. Turn off the oil pump and press down on the lift and pressure type respectively. When you hear the “click” sound, turn on the pump to raise the mold to the upper limit position.

7. The mold keeps going downwards and holds the pump:

(1) The adjustment of the lower limit is improper or the switch is damaged.

(2) K3 and K4 reversed.

(3) The solenoid valve is stuck. Turn off the oil pump and press down the pressure boosting type. When you hear the sound of “click”, turn on the pump and raise the knife to the upper limit position.

Cangzhou Best Machinery Co., Ltd set up in 2015, with great power in production and techniques, we are a leading manufacturer of roll forming machines in North of China.We have two workshops more than 4000 square meters, and have own processing machines and design engineer, so that can control machine production time and quality;Our factory is near Beijing or Tianjing, and in Cangzhou there is railway station, so it is convinent transport.Welcome to visit our factory anytime.

Our main products are CUSTOMIZED ROLL FORMING MACHINES, because clients will use roll forming machines instead of bending machine or pressing machines to save labor, and improve production, our regular products are roof sheet roll forming machine, roof tile roll forming machine, CZ roll forming machine, floor decking roll forming machine, highway guardrail roll forming machine, cable tray roll forming machine, stud and track roll forming machine, door roll forming machine, slitting and cut to length, sandwich panel machine and so on.

We have advanced production equipment and our engineering personnel and technicians have extensive experience in designing, developing, and manufacturing machineries. They pay close attention to and keep up with the developing trend of technologies and use new technologies in manufacturing machinery, to keep them competitive. Our products feature high efficiency, high flexibility and low cost.

"Customers are the first, success comes from development" is our principle. We bear this in mind during the whole process from design and development of product to after-sales services. We will design and manufacture machinery strictly in accordance with your requirements.

With good after-sales service network, we can provide support covering the whole process of purchasing, which help you get perfect machinery. We'll solve all the problems you have while using the machines and we'll provide considerate services.

Our machines have been sold to North America, like US, Canada, South America, Nicaragua, Peru, Brazil, Bolivia, Uruaguy, Argentina, Europe, like Greece, Middle east, like Saudi Arab, Dubai, Iran, Iraq, Africa, Egypt, Ghana, Nigeria, Ethiopia, Malawi, Kenya, Tanzania, Zambia, Zimbabwe, South Africa, Australia, New Calidonia, Asia, India, Thailand, Philippines, Indonesia, Papua New Guinea, Bangladesh, Pakistan, Turkmenistan, Malaysia, Vietnam, Mongolia, helping us enter the international market.

Excellent service and high technology assist you to create a bright future.

To make sure machine quality, we applied CE certificate and SGS certificate and so on.

Our roll froming machine exported all over the world and win good repution,clients give good feedback,we have been exported to more than 120 countries and regions in the world, including: Germany, Japan, Italy, Russia, Japan, South Korea, Turkey, Brazil , India, the United Arab Emirates, Saudi Arabia and other countries, the products are subject to a great welcome and praise. INDIA, AFRICA, SOUTH AMERICA.

WE WILL YOUR BEST SUPPLIER IN CHINA,WELCOME TO CONTACT US.