Galvanized Formwork Tie Rod System With Dywidag Thread, Wing Nut and Steel Cone
Brand Name:HORIZON
Certification:SGS
Model Number:tie rod system
Minimum Order Quantity:10000 pcs
Delivery Time:15-25 days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Site Member
Location:
Xingtai Hebei China
Address:
HUSTPARK BUILDING NO. 4, ZHONGXING ST. XINGTAI, HEBEI, CHINA
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
Galvanized Formwork Tie Rod System With Dywidag Thread, Wing Nut and Steel Cones
The Flanged Wing Nut is available in different diameters. With a larger pedestal, it allows a direct load bearing on walings.
It can be screwed on or loosened using a hexagon wrench, thread bar or hammer.
Steel cone is usually used in formwork tie rod system for easy removing the outer tie rod.
Formwork wing nut with flange:
| Flanged Wing nut | Bar Ø (mm) | Plate dia (mm) | Height/Hex. (mm) | Weight (Kg) |
| 15 | 90 | 55/27 | 0.50 | |
| 15 | 100 | 55/27 | 0.62 | |
| 15 | 110 | 55/27 | 0.80 | |
| 20 | 120 | 60/36 | 1.00 |
| 15 | 64 | 75/27 | 0.34 | |
| 15 | 100 | 100/27 | 0.62 |
| Part Name | Specification | Weight (kg) | Remark |
Tie-rod | D15 D20 | 1.5 kg/m 2.7 kg/m | L=6m; Special length available upon request. |
Super plate | D15 | 1.28 | Used in case of tie-rod and formwork panels are not vertical. |
3-lug wing nut | D15 D20 | 0.97 0.78 | For tie-rod D15; For tie-rod D20 |
Waling plate | 120 x 120 x 6, Φ19 120 x 120 x 8, Φ19 | 0.65 0.85 | For tie-rod and nut D15; galvanized |
Water stopper | D15 D20 | 0.55 0.72 | Used in water resistant wall; With tie-rod D15 / D20 |
Anchor plate | D20 | 0.95 | Embedded in concrete as lost part |
Galvanized Formwork Tie Rod System With Dywidag Thread, Wing Nut and Steel Cone
Inquiry Cart
0