High Accuracy Web Tension Control System Triphase 24V Output AC 180~260V For Face Mask Machine

Servo Web Guiding System Web Guiding Controller Power AC 180~260 V For Face Mask Machine

EPC200 servo edge position controller is a high precision controller with PI control, can choose a variety of detector, to trace edge, trace line. With ultrasonic, photoelectric detector, servo motor/drive cylinder servo system form a servo edge position control system,which can be widely used in printing, packaging, paper making, textile printing and dyeing industry of roll material in edge position control

Function

1. Small size, compact structure, with internal control power supply

2. Using panel membrane switches, simple operation, beautiful and generous

3. Can select ultrasonic, photoelectric detector to trace edge and trace line,control automatically.

4. The advanced PI algorithm , excellent man-machine interface, convenient for user

5. The state of the system parameters have power- fail protection function

6. With functions of RS485 communication interface,with PC, PLC collecting and distributing control system

7. External can connect left and right position limit switch,External center offset adjustment can be performed

8. Can adjust external center- deviation

Introduction:

MC1～+ 12V: connect to start control switch

MC2～+ 12V: reserved control interface

GND1: signal ground

J1～J2: when trouble alarm warning the internal relay operation, the two interfaces connected.

NC: not connected

PE: safety ground

AC220V: controller power supply

8 cores servo motor drive cable socket plug to JP1. 5 cores detector cable socket plug to JP4.External right/left limit switch, should be connect 4 pins JP2 if needed. RS485 communication interface, should be connected to 3 pins JP3 if needed.

Detector connection

movable unwinding edge position controller Installation

Under the drive of motor, unwinding roller and guide roller moving together. Detector must be fixed in the trestle, located in the material entrance behind guide roller.

Material on the guide roller can’t be sliding, need to make sure that the angle of material and roller is big enough in case of sliding, if possible, the material moving direction is opposite with roller rotation direction, in case of sliding.

movable rewinding edge position controller Installation

Detector must be fixed in the moving parts,detector and motor drive moving together, and located in the material entrance behind guide roller.Material on the guide roller can’t be sliding, need to make sure that the angle of material and roller is big enough in case of sliding.Material pre- entrance span P must be smaller.

Wuhan Micro Control Electric Co,LTD ( Wuhan True Engin Technology Development Co., Ltd ) is located in the coast of South Lake and surrounded by numerous colleges and universities.The Company focuses on the developing and production of industrial test and control system .True Engin is the first company which is committed to the tension control system developing in China. After more than ten years of prosperity , it has forged an excellent team in developing and application .Our Instructors lead tens of engineering masters and CNC technology professionals that treating technology innovation,high-quality protection to the products and seamless customer service as the thrust of the development of enterprises.We committed to upgrading the technology of Chinese Printing and Packaging Machinery Control System，Complex Control System and Cutting Machine Control System.Our target is comprehensive upgrading of the competitiveness of domestic industry of Machine Controlling

In the direction of Networked Measurement and Control System，we have a large number of advanced test and analysis equipment,software and Network Control Development Platform.We have the equipments such as U.S. HP, TEKTRONIX, NI, FLUKE and so on.We also have a close co-operation with the Measurement control Institute ，the Friction Institute, the Materials Institute of the Wuhan Technology University，and have a wide range of products co-operation with the Ordnance factory 711, 3303. Core parts through 711 SMT production lines, product after 711 of ISO9000 quality management system review and GJB related mechanical and electrical performance test.

Through years of research and development our company has formed a series of products about PLC、tension control system、tension sensing system、tension controller、tension detector、Mitsubishi magnetic powder brake、Mitsubishi tension detector、Mitsubishi tension controller、magnetic powder clutch and so on.The series of tension products are widely equipped with machinery equipments on a variety of printed-packaging, textile, wire and cable industry in the domestic, we have successfully provided the best match of tension control system and OEM for several magnetic clutch industry or magnetic powder brake industry.