

Add to Cart
Oral Drug Abuse Test kit ,Oral Drug Test midstream, High Accuracy,
Easily & Quick operation, Gold colloidal method
Cocaine (COC) | Benzoylecgonine | 20 |
Opiates (OPI/MOP) | Morphine | 40 |
Methadone (MTD) | Methadone | 30 |
Oxycodone (OXY) | Oxycodone | 20 |
Cotinine(COT) | Cotinine | 20 |
Methylenedioxymethamphetamine(MDMA) d,l-Methylenedioxymethamphetamine50 | ||
Synthetic Marijuana(K2) | JWH -018, JWH- 073 | 25 |
Ketamine(KET) | Ketamine | 50 |
Barbiturates(BAR) | Secobarbital | 50 |
Buprenorphine (BUP) | Buprenorphine | 10 |
Tramadol(TML) | Tramadol | 30 |
6-mono-aceto-morphine (6-MAM) | 6-mono-aceto-morphine | 10 |
Fentanyl(FYL) | Norfentanyl | 50 |
Test | Calibrator | Cut-off |
Alcohol(ALC) | Alcohol | 0.02% |
This assay provides only a preliminary analytical test result. A
more specific alternate chemical method must be used in order to
obtain a confirmed analytical result. Gas chromatography/mass
spectrometry (GC/MS) and gas chromatography/tandem mass
spectrometry (GC/MS/MS) are the preferred confirmatory methods.
Professional judgment should be applied to any drug of abuse test
result, particularly when preliminary positive results are
indicated.
Summary
Amphetamine (AMP)
Amphetamine is a sympathomimetic amine with therapeutic
indications. The drug is often self-administered by nasal
inhalation or oral ingestion. Depending on the route of
administration, amphetamine can be detected in oral fluid as early
as 5 -10 minutes following use1. Amphetamine can be detected in
oral fluids for up to 72 hours after use1.
The amphetamine assay contained within the Multi-Drug Rapid Test
Midstream yields a positive result when the amphetamine
concentration in oral fluid exceeds 50ng/ml.
Methamphetamine (MET)
Methamphetamine is a potent stimulant chemically related to
amphetamine but with greater CNS stimulation properties. The drug
is often self-administered by nasal inhalation, smoking or oral
ingestion. Depending on the route of administration,
methamphetamine can be detected in oral fluid as early as 5-10
minutes following use1. Methamphetamine can be detected in oral
fluids for up to 72 hours after use1.
The Methamphetamine assay contained within the Multi-Drug Rapid
Test Midstream yields a positive result when the methamphetamine
concentration in oral fluid exceeds 50ng/ml.
Cocaine (COC)
Cocaine is a potent central nervous system (CNS) stimulant and a
local anesthetic derived from the coca plant (erythroxylum coca).
The drug is often self-administered by nasal inhalation,
intravenous injection and free-base smoking. Depending on the route
of administration, cocaine and metabolites benzoylecgonine and
ecgonine methyl ester can be detected in oral fluid as early as
5-10 minutes following use1. Cocaine and benzoylecgonine can be
detected in oral fluids for up to 24 hours after use1.
The cocaine assay contained within the Multi-Drug Rapid Test
Midstream for cocaine and opiates yields a positive result when the
cocaine metabolite in oral fluid exceeds 20ng/ml.
Opiates (OPI/MOP)
The drug class opiates refers to any drug that is derived from the
opium poppy, including naturally occurring compounds such as
morphine and codeine and semi-synthetic drugs such as heroin.
Opiates act to control pain by depressing the central nervous
system. The drugs demonstrate addictive properties when used for
sustained periods of time; symptoms of withdrawal may include
sweating, shaking, nausea and irritability. Opiates can be taken
orally or by injection routes including intravenous, intramuscular
and subcutaneous; illegal users may also take the intravenously or
by nasal inhalation. Using an immunoassay cutoff level of 40 ng/ml,
codeine can be detected in the oral fluid within 1 hour following a
single oral dose and can remain detectable for 7-21 hours after the
dose2. Heroin metabolite 6-monoacetylmorphine (6-MAM) is found more
prevalently in excreted unmetabolized, and is also the major
metabolic product of codeine and heroin.
The opiates assay contained within the Multi-Drug Rapid Test
Midstream yields a positive result when the opiates concentration
in oral fluid exceeds 40 ng/ml.
Marijuana (THC)
11-nor-9-tetrahydrocannabinol-9-carboxylic acid (9-THC-COOH), the
metabolite of THC ( 9-tetrahydrocannabinol), is detectable in
saliva shortly after use. The detection of the drug is thought to
be primarily due to the direct exposure of the drug to the mouth
(oral and smoking administrations) and the subsequent sequestering
of the drug in the buccal cavity3. Historical studies have shown a
window of detection for THC in saliva of up to 14 hours after drug
use3.
The THC assay contained within the Multi-Drug Rapid Test Midstream
yields a positive result when the 9-tetrahydrocannabinol
concentration in oral fluid exceeds 50ng/ml.
Allow the test, urine specimen, and/or controls to reach room
temperature
(15-30ºC) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove
the test from the sealed pouch and use it within one hour.
2. Take off the Midstream cap and insert the absorbent wick to the
mouth .put it under the tongue to collect Saliva until the control
line appears and then take out the midstream.
3. Place the test Midstream on a clean and level surface. See
illustration below.
4. Read results at 10 minutes. Do not read results after 1 hour
5. Read Alcohol strip result at three to Five (3-5) minutes.
Compare the color of the reaction pad with the chart on foil to
determine the relative saliva alcohol level.
INTERPRETATION OF RESULTS
NEGATIVE:* Two lines appear. One colored line should be in the
control region (C), and another apparent colored line adjacent
should be in the test region (Drug/T). This negative result
indicates that the drug concentration is below the detectable
level. *NOTE: The shade of color in the test line region (Drug/T)
will vary, but it should be considered negative whenever there is
even a faint line.
POSITIVE: One colored line appears in the control region (C). No
line appears in the test region (Drug/T). This positive result
indicates that the drug concentration is above the detectable
level. INVALID: Control line fails to appear. Insufficient specimen
volume or incorrect procedural techniques are the most likely
reasons for control line failure. Review the procedure and repeat
the test using a new test panel. If the problem persists,
discontinue using the lot immediately and contact the manufacturer.
QUALITY CONTROL
A procedural control is included in the test. A line appearing in
the control region
(C) is considered an internal procedural control. It confirms
sufficient specimen volume, adequate membrane wicking and correct
procedural technique.
Control standards are not supplied with this kit. However, it is
recommended that positive and negative controls be tested as good
laboratory practice to confirm the test procedure and to verify
proper test performance.
ORIENT NEW LIFE MEDICAL CO., LTD. | |
Contact: | Jerry Meng |
Email: | Jerry @ newlifebiotest .com |
Tel. | +86 18657312116 |
SKYPE | enetjerry |