Product Details
2-Ch video to fiber converter AHD / TVI / CVI / PAL / NTSC / SECAM
formats
Introduction
HD series Video Digital Optical Converter adopt the advanced
international digital video and optical fiber transmission
technology, and implement the transmission of real-time &
synchronization, no-distortion and high quality video effect, which
can meet the user’s requirement; the play-and-plug design makes the
installation more convenient and easier, and it is unnecessary to
implement the spot adjustment.
Its optical module and core circuit adopt the imported components
that have high stability, and all optical & electrical
interfaces conform to the international standards, which is applied
to the different working environment. This optical transceiver with
video status indication can monitor the normal operation of system.
Features
- Card type or independent structure, which is applied to centralized
management 2U/4U framework
- 8-bit digital code and non-compression type video transmission
- Support any high-resolution video signal
- 5Hz-10MHz video channel
- Automatic compatible PAL, NTSC and SECAM video system
- With APC circuit, constant input optical power, and large dynamic
range
- Kilomega optical fiber transmission, large capacity, and easy to
upgrade
- Power supply and other parameter state indication, which can
monitor the operation condition of system
- Support no-damage regenerative trunk of video
- Advanced self-adapting technology, and it is unnecessary to
implement the adjustment of spot electrics or optics when using
- Industry-grade design and modularization design make the equipment
reliable and flexible
- Can automatically restore the fuse of power supply
- Full built-in power supply and the appearance design of shell are
unique.
Technical Specification
Video |
Number of channels: | 2-Channel Video |
Signal system: | PAL/NTSC/SECAM |
Nominal input/output voltage: | 1Vp-p |
Input/output impedance: | 75Ω |
Bandwidth per channel: | 6.5MHz |
Bit Resolution | 8-Bit Digital Transmission |
Differential gain: | 1.3% (typical value) |
Differential phase: | 1.3° (typical value) |
Weighting signal-noise ratio: | 63dB (typical value) |
Data |
Interface type: | RS-485/422/Manchester or RS-232 |
Operating mode: | Full duplex/half duplex (only for RS-485/422 interface) |
Transmission speed : | 2400~9600Kbps |
BER: | <1×10-9 |
Ethernet |
Number of channels: | 2 |
Standard: | ANSI X3T12TP-PMD IEEE 802.3/802.3u |
Protocol: | IEEE 802.1q VLAN IEEE802.3x Full Duplex flow |
| control and Backpressure Half Duplex flow control |
Work mode: | 10M/100M , Full/Half Duplex Auto-negotiation |
Throughput rate: | 100%@10M |
Frame Loss Rate: | 0 |
Connector |
Video connector: | BNC socket |
Asynchronous data connector: | 3 Pin Terminal Block |
Ethernet connector: | RJ-45 |
Optic fiber connector: | FC/PC (or ST/PC optional) |
Power Supply |
DC: +5V 2A | +5V 2A |
Total power consumption: | <10W (Single end) |
Environmental Condition |
Operating temp: | -25°C~+70°C |
Storage temp: | -40°C~+80°C |
Relative humidity: | 0~95% (non-condensing) |
Optical Fiber Link |
Transmission distance |
0~40Km (Forward video, single-mode fiber, standard) |
0~60Km (Forward video, single-mode fiber, long-haul) |
0~80Km (Forward video, single-mode fiber, ultra-long haul) |
0~20Km (Bidirectional video, single-mode fiber, standard) |
0~40Km (Bidirectional video, single-mode fiber, long-haul) |
0~80Km (Bidirectional video, single-mode fiber, ultra-long haul) |
0~2Km (Multi-mode fiber, standard) |
Mechanical Structure & Environment
Power | DC5V 2A |
Power Consumption | ≤6W |
Working Temperature | -15ºC ~65ºC |
Storage Temperature | -40ºC ~85ºC |
Relative Humidity | 5%~95% ( no condensation) |
MTBF | ≥ 100000Hours |
Application
Ordering information
Model Number | Product Configuration | Fiber Interface | Fiber Mode | Wavelengths | Maximum Transmission Distance |
HD-M2V-T/RF | 2 Ch Video | FC/SC/ST | Multi-mode | 1310/1550 nm | 2Km |
HD-S2V-T/RF | 2 Ch Video | FC/SC/ST | Single-mode | 1310/1550 nm | 20Km |
HD-M2V↑1D↓3-T/RF | 2 Ch Video 1 Ch Data | FC/SC/ST | Multi-mode | 1310/1550 nm | 2Km |
HD-S2V↑1D↓3-T/RF | 2 Ch Video 1 Ch Data | FC/SC/ST | Single-mode | 1310/1550 nm | 20Km |
Company profile
- 2009 HANDAR OPTICS Established in Nov 2009 , with professional
R&D and sales team who had been working in fiber optical
telecommunication field since 2004 .
- 2010 HANDAR OPTICS started to produce full range of
multi-functional video/audio/data/Ethernet/Telephone/Alarm to fiber
converters and became to one of the leading manufacturers in this
field
- 2011 HANDAP OTPCIS founded our engineers team to develop the SFP
transceivers , and start to produce 155M and 1.25G SFP transceivers
at Aug 2011
- 2012 HANDAR OPTICS started the project for 10G SFP+
- 2013 HANDAR OPTICS founded our engineers team to develop the
Industrial level Ethernet Switch and POE switch . and stated to
produce at the end of 2013 .
- 2014 HANDAR OPTICS started the project for 40G QSFP/CFP/CFP2
- 2015 HANDAR OPTICS improved our products for analog
video/audio/data multiplexer to High-Definition series , include
Analog high-definition TVI/CVI/AHD and Digital high-definition
SDI/HDMI . We became to the leading manufacturer of such products
in Shenzhen China .
- 2016 HANDAR OPTICS moved to new office with better workshop which
allow us to offer better products and services to our partners .
- 2017 HANDAR OPTICS will keep focusing on fiber optical
telecommunications field and offer to all our partners higher
quality and better services .
2-Ch video to fiber converter AHD / TVI / CVI / PAL / NTSC / SECAM
formats
Company Profile
Shenzhen Handar Optical Technology Co.,LTD,Located in
shenzhen,china,was founded in 2009,which is professionally engaging
in researching & developing,manufacturing,and marketing fiber
optical communication product.
With several-year development,Handar has established a profession
teechinical team,strict quality control system and hight -tech
production line.
Currenty Handar featured product including SFP transceiver
155M/1.25G/10G/40G/100G,media converter,AHD/TVI/CVI video to fiber
converter and industrial ethernet switch. They are widely adopted
in IP LAN,WAN, Telecommunicaton and hight definition CCTV
systems.Users include China Telecom,China Unicom,China Mobile,China
Broadcast&Television,also we are exported to more than 30
countries and areas,such as USA,Germany,Spain,Russia,Denmark,Korea
,Malaysia,Singapore and etc.
Handar is aimed at establish long term relationship with global
partners,we providing better quality,effective price,excellent
after-sales-sevices.We are ISO 9001 certificated company,our products got CE
certificate and were approred by RoHS standard.