Carbon Coated aluminum Foil for Lithium Ion Super Capacitor

• Basis Materials:aluminum foil.
• substrate Materials Thickness: 12-40 um.
• Roll Max Width: 1250 mm.
• Package:Wooden box.
• Surface Color:black.

 Increase the adhesion between the aluminium foil and the active
material.                    

 Decrease the using amount of binder for the electrode                        

 Enhance energy density of the battery ,and lower the cost of the
electrode production                        

 Protect the AI current collector from surface corrosion and
oxidation.                       

 Decrease polarization                        

 Raise the pass rate of the cell                      

 Improve the rate capability                  

• Lithium-ion super capacitor.

 Planar density  (Both side)                      

 1.0g/m2 1.0±0.2mg/cm2                         

 1.5g/m2 1.5±0.3mg/cm2                         

 2.0g/m2 2.0±0.3mg/cm2                         

 2.5g/m2 2.5±0.3mg/cm2                         

 Covering rate                       

 min.80%                      

 min.90%                      

 Min.100%                     

 min.100                      

 Conductivity                        

 ~30S/cm                      

 ~30S/cm                      

 ~30S/cm                      

 ~30S/cm                      

 Peeling Strength                    

 2.0N                         

 2.0 N                        

 2.5N                         

 2.5N                         

 Corrosion resistance                        

 No exfoliation                       

 No exfoliation                       

 No exfoliation                       

 No exfoliation                       

• Avoid using the product under dust, The dust purification should be over 0.1M.
• Avoid any collisions against hard materials. Handle the product gently.

• Use the product in the workshop with humidity of ≤20%RH and a high dust purification.
• Store the product below 35℃, do not open the vacuum package before use .after use ,the left product should be dried at 40-60℃ for 2 hours under vacuum ,then kept in the cabinet filled with nitrogen at room temperature.
• The product can be stored under vacuum package for one year at ambient temperature and moisture without direct sun. Once the vacuum package is opened, the product can be kept under vacuum cabinet for at most one month.

Jima Copper is a professional supplier of high-precision copper and copper alloy series of foil roll brand. Jima provided 4-800μm thick copper foil, Maximum width 1580 mm, Jima copper foil production capacity is sufficient, with complete varieties, excellent quality.

Jima specializes in the research, development, promotion and application of new technology of rolling copper foil, and it is equipped with a research center of rolling copper foil engineering technology. Jima copper can stably provide various specifications of high-precision flat foil (hard foil, soft foil, semi-hard foil, etc.) and surface treatment foil (red dumb copper foil, black dumb copper foil, high corrosion resistance rolled copper foil, etc.). The products are widely used in electromagnetic shielding, heat dissipation, graphene conductive film production, aerospace, flexible copper plate, lithium battery, 5G communications, LED, intelligent vehicles, drones, wearable electronics and other fields, which is highly recognized and praised by customers. And it is exported to Korea, Japan, Germany, the United States, Russia, India and other countries.