

Add to Cart
Polyester Endless Round Sling/Ce GS Certificated/W. L. L. 1t purple
Product Description
Product Name | round sling |
Material | 100%high tenacity polyester |
Width | 30mm |
Length | from 1m to 10m |
W.L.L. | 1T |
Safety Factor | 6:1,7:1,8:1 |
Layer | single ply or double ply |
Color | purple |
Standard | EN1492-2:2008 |
Elongation | >=7% |
Lifting Eye types | no eye |
Material
Polyester:PE
Used mainly where acid conditions are present or minimum stretch is
desired,polyester is unaffected by common acid and hot bleaching agents,it is not suitable for use with concentrated
sulfuric acid,alkaline or at temperature in excess of 100'C or less than -40'C,stretch at rated capacity is approximately 3%
Nylon:PA
The most widely used general-purpose synthetic web sling,is
unaffected by grease and oil.It has good chemical resistance to
aldehyde,ethers,and strong alkalis:But is not suitable for use with
acids and bleaching agents or at temperatures in excess of 100'C or less than -40'C.Stretch at rated capacity is approximately 6-8%.And if wet,maybe
the strength will be less over 10%
Polypropyline:PP
Polypropyline is little affected by acids or alkalis and suitable
for application where the highest resistance to chemicals other
than solvents is required.Using temperatures scope is from -40'C up to 80'C
High-performance synthetic sling is made of a super strong
polyethylene fiber.This sling is up to 15 times stronger than steel
and weight-for-weight is 40% stronger than competing polyester
sling.It has high energy absorption and low elongation,sling floats
on water,and is extremely resistant to abrasion,moisture,UV rays
and chemicals.As a result,it has an almost unlimited range of
application.Providing maximum strength and security for minimum
weight.
TS-R01 Round sling ( Single Ply Sleeve )
Item No. | WLL (kg) | Dia (mm) | L(m) | S.F 7:1 | |
Min | Max | ||||
TS-R01-01 | 1000 | 6 | 0.5 | 100 | 0.30 |
TS -R01-02 | 2000 | 7 | 0.5 | 100 | 0.44 |
TS -R01-03 | 3000 | 8 | 0.5 | 100 | 0.65 |
TS -R01-04 | 4000 | 9 | 1.0 | 100 | 0.83 |
TS -R01-05 | 5000 | 11 | 1.0 | 100 | 1.01 |
TS -R01-06 | 6000 | 12 | 1.0 | 100 | 1.19 |
TS -R01-08 | 8000 | 13 | 1.0 | 100 | 1.50 |
TS -R01-10 | 10000 | 15 | 2.0 | 100 | 1.95 |
TS -R01-12 | 12000 | 16 | 2.0 | 100 | 2.46 |
TS -R01-15 | 15000 | 18 | 2.0 | 100 | 2.97 |
TS -R01-20 | 20000 | 20 | 2.5 | 100 | 4.66 |
TS -R01-25 | 25000 | 24 | 2.5 | 100 | 5.84 |
TS -R01-30 | 30000 | 32 | 2.5 | 100 | 9.23 |
TS -R01-40 | 40000 | 40 | 2.5 | 100 | 12.1 |
TS -R01-50 | 50000 | 45 | 2.5 | 100 | 14.1 |
TS -R01-60 | 60000 | 65 | 4.0 | 100 | 17.3 |
TS -R01-80 | 80000 | 70 | 4.0 | 100 | 22.2 |
TS -R01-100 | 100000 | 80 | 4.0 | 100 | 26.0 |
TS -R01-120 | 120000 | 5.0 | 100 | ||
TS -R01-150 | 150000 | 5.0 | 100 | ||
TS -R01-200 | 200000 | 120 | 5.0 | 100 | 64.0 |
TS -R01-250 | 250000 | 5.0 | 100 | ||
TS -R01-300 | 300000 | 160 | 5.0 | 100 | 79.0 |
TS -R01-350 | 350000 | 5.0 | 100 | ||
TS -R01-400 | 400000 | 200 | 5.0 | 100 | 98.4 |
TS -R01-450 | 450000 | 5.0 | 100 | ||
TS -R01-500 | 500000 | 220 | 8.0 | 100 | 121.2 |
Item No. | WLL (kg) | Dia (mm) | L(m) | S.F 7:1 g/m | |
Min | Max | ||||
TS-R02-01 | 1000 | 15 | 0.5 | 100 | 0.33 |
TS -R02-02 | 2000 | 16 | 0.5 | 100 | 0.47 |
TS -R02-03 | 3000 | 18 | 0.5 | 100 | 0.68 |
TS -R02-04 | 4000 | 20 | 1.0 | 100 | 0.85 |
TS -R02-05 | 5000 | 25 | 1.0 | 100 | 1.06 |
TS -R02-06 | 6000 | 27 | 1.0 | 100 | 1.28 |
TS -R02-08 | 8000 | 28 | 1.0 | 100 | 1.59 |
TS -R02-10 | 10000 | 29 | 2.0 | 100 | 2.10 |
Item No. | WLL (kg) | Dia (mm) | L | |
Min | Max | |||
TS -R03-01 | 1000 | 11 | 1.0 | 80 |
TS -R03-02 | 2000 | 12 | 1.5 | 80 |
TS -R03-03 | 3000 | 14 | 1.5 | 80 |
TS -R03-04 | 4000 | 15 | 1.5 | 80 |
TS -R03-05 | 5000 | 23 | 1.5 | 80 |
TS -R03-06 | 6000 | 25 | 2.0 | 80 |
TS -R03-08 | 8000 | 26 | 3.0 | 80 |
TS -R03-10 | 10000 | 27 | 3.0 | 80 |
TS -R03-15 | 15000 | 29 | 3.0 | 80 |
TS -R03-20 | 20000 | 31 | 3.0 | 80 |
TS -R03-25 | 25000 | 34 | 3.0 | 80 |
TS -R03-30 | 30000 | 36 | 4.0 | 80 |
TS -R03-40 | 40000 | 40 | 4.0 | 80 |
TS -R03-50 | 50000 | 46 | 5.0 | 80 |
TS -R03-80 | 80000 | 5.0 | 80 | |
TS -R03-100 | 100000 | 5.0 | 80 | |
TS -R03-150 | 150000 | 5.0 | 80 | |
TS -R03-200 | 200000 | 5.0 | 80 |
Item No. | WLL (kg) | Dia (mm) | L(M) | S.F 7:1 g/m | |
Min | Max | ||||
TS -R04-05 | 5000 | 23 | 1.5 | 80 | |
TS -R04-06 | 6000 | 25 | 2.0 | 80 | |
TS -R04-08 | 8000 | 26 | 3.0 | 80 | |
TS -R04-10 | 10000 | 27 | 3.0 | 80 | |
TS -R04-15 | 15000 | 29 | 3.0 | 80 | |
TS -R04-20 | 20000 | 31 | 3.0 | 80 | |
TS -R04-25 | 25000 | 34 | 3.0 | 80 | |
TS -R04-30 | 30000 | 36 | 4.0 | 80 | |
TS -R04-40 | 40000 | 40 | 4.0 | 80 | |
TS -R04-50 | 50000 | 46 | 4.0 | 80 | |
TS -R04-60 | 60000 | 4.0 | 80 | ||
TS -R04-80 | 80000 | 4.0 | 80 | ||
TS -R04-100 | 100000 | 5.0 | 80 | ||
TS -R04-120 | 120000 | 5.0 | 80 | ||
TS -R04-150 | 150000 | 5.0 | 80 | ||
TS -R04-200 | 200000 | 5.0 | 80 | ||
TS -R04-250 | 250000 | 5.0 | 80 | ||
TS -R04-300 | 300000 | 5.0 | 80 |
Item No. | WLL (LBS) | Dia (IN) | Length:(FT) | |
Min | Max | |||
TS-R05-01 | 2600 | 6 | 0.5 | 300 |
TS -R05-02 | 5300 | 7 | 0.5 | 300 |
TS -R05-03 | 8400 | 8 | 0.5 | 300 |
TS -R05-04 | 10600 | 9 | 0.5 | 300 |
TS -R05-05 | 13200 | 11 | 0.5 | 300 |
TS -R05-06 | 16800 | 12 | 1.0 | 300 |
TS -R05-07 | 21200 | 13 | 1.0 | 300 |
TS -R05-08 | 25000 | 15 | 2.0 | 300 |
TS -R05-09 | 31000 | 16 | 2.0 | 300 |
TS -R05-10 | 40000 | 18 | 2.0 | 300 |
TS -R05-11 | 53000 | 20 | 2.5 | 300 |
TS -R05-12 | 66000 | 24 | 2.5 | 300 |
TS -R05-13 | 90000 | 32 | 2.5 | 300 |
TS -R05-14 | 100000 | 40 | 2.5 | 300 |
Item No. | Dia(mm) | Polyester | |||
Kg/m | M.B.L(ton) | Kg/m | M.B.L(ton) | ||
TS-R06-01 | 40 | 1.22 | 26 | 0.9 | 116 |
TS -R06-02 | 44 | 1.5 | 31 | 1.1 | 132 |
TS -R06-03 | 48 | 1.8 | 36 | 1.3 | 156 |
TS -R06-04 | 52 | 2.1 | 42 | 1.56 | 175 |
TS -R06-05 | 56 | 2.4 | 48 | 1.88 | 212 |
TS -R06-06 | 60 | 2.8 | 53 | 2.05 | 230 |
TS -R06-07 | 64 | 3.15 | 60 | 2.35 | 264 |
TS -R06-08 | 72 | 4.0 | 75 | 3.0 | 337 |
TS -R06-09 | 80 | 4.9 | 93 | 3.7 | 416 |
TS -R06-10 | 88 | 5.9 | 112 | 4.5 | 503 |
TS -R06-11 | 96 | 7 | 132 | 5.3 | 590 |
In-service Inspection, Maintenance and Replacement
Inspect slings each day before use, looking for:
Do not use worn or damaged slings or attachments. Discard or repair
them. Use damaged slings only after they are repaired,
reconditioned, and proof tested by the sling manufacturer or a
qualified person. Keep certificates of proof test.
Maintenance requirements are minimal. Belt slings may be cleaned
with clear water. Remember weak chemical
solutions will become increasingly stronger by evaporation.
Regularly inspect belt slings and, in the event of the
following defects, refer the sling to a Competent Person for
thorough examination: illegible markings; damaged,
chaffed or cut webbing; damaged or loose stitching; heat damage;
burns; chemical damage; solar degradation;
damaged or deformed end fittings.