Fiber Optical Network Units Optical Network Terminal Device 20km Distance

FA-EONU8010WF , Fiber Optical Network Unit ONU With One EPON Port And One Fast Ethernet Port

WiFi Standard Of OLT And ONU

In our ONU / OLT description , you always see 802.11 B/G/N . So what is it ?

IEEE 802.11b is a standard of WLAN . The carrier frequency is 2.4GHz , its transmission speed is 11Mbit/s . IEEE 802.11b is the most famous and most popular wireless LAN standard , It is also erroneously labeled as Wi-Fi sometimes . In fact Wi-Fi is a trademark belong to the wireless local area network alliance (WLANA) but the trademark do not have relations with the IEEE 802.11b standard. There are 14 channels which bandwidth is 22MHz each can be used in the 2.4 GHz-ISM band . The subsequent standard of IEEE 802.11b is IEEE 802.11g , the transmission rate of IEEE 802.11g is 54Mbit/s.

IEEE 802.11g : Equipments based on 802.11b and 802.11g are compatible . In order to improve the transmission rate of 802.11g , it adopts 2.4GHz band , using CCK technology and 802.11b (Wi-Fi) to realize backward compatible , at the same time , in order to support data flow reach 54Mbit/s it uses OFDM technology and it provides larger bandwidth which is 1.5 times of 802.11a. There is Wi-Fi compatibility problem between 802.11g and 802.11a, so dual band technology 802.11a+g(=b) was emerged as the times required to bridge this gap, it integrated 802.11a and 802.11g very well and work on both 2.4GHz and 5GHz bands,it also obey 802.11b/g/a standards, and backward compatible with 802.11b,it makes users able to connect with the existing or future 802.11 network in a simple way.

IEEE 802.11n : In January 2004, IEEE announced a new unit to develop 802.11 new standards. The data transmission speed is estimated to reach 540Mbit/s ( speed in the physical layer rate must be higher ), the new standard should be 50 times faster than 802.11b, and about 10 times faster than 802.11g. 802.11n will support much longer distance than the current wireless network. 802.11n also added standard for MIMO (multiple-input multiple-output). MIMO use multiple transmit and receive antennas to realizes higher data transmission rate .MIMO also use Alamouti coding schemes to increase the transmission range.

Product Features Of FA-EONU8010WF

• Conform to IEEE802.3ah standard

• Support Ethernet service layer 2 switching and wire-speed forwarding of uplink and downlink services

• Support frame filtering and suppression

• Support standard 802.1Q Vlan function, support VLAN conversion

• Support 4094 VLANs (802.1Q)

• Support Dynamic Bandwidth Allocation (DBA) function

• Support QoS, including traffic flow classification, priority marking, queue and dispatch, traffic shaping and traffic control, etc

• Support IGMP Snooping

• Single ONU supports up to 1 LLID.

• Support power failure alarm

• Support Ethernet port rate limit loop detection

• Support lightning protection for power supply and lightning protection for service port

• Complies with 2.4GHz IEEE802.11n v2.0 and backward compatible with IEEE 802.11b/g standards

• Supports NAT/NAPT IP sharing

• WAN Protocols: PPPoE / StaticIP / PPTP / DHCP

• Supports advanced 2T2R MIMO technology to enhance the throughput and coverage range significantly

• High speed data rate - up to 300Mbps

  
  

  Product Parameters

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.