1.25 Gbps Speed EPON ONU Optical Network Unit Complies IEEE 802.3ah Standard

EPON ONU Optical Network Unit With 1 GE 3 FE Ports Support WiFi And VLAN

Fiberall ONU is intelligent equipment which can provide multi-services. They are complies with international IEEE 802.3ah standard and also meet China national occupation standard YD/T 1475-2006, as well as China Telecom CTC requirement for EPON device (China Telecom EPON Technical Requirement 2.1/3.0.) . So they are with good interoperability and operability and it is able to work with OLT made by mainstream manufacturers. So user can use different equipments from different suppliers which is with the best competitive cost in the same network and do not need to worry about the compatibility problem. but please pay attention that our ONU and OLT is not universal and they may meet compatible problem with some unique equipment. In order to avoid mistake, it is better to check the compatibility before order.

Our Optical Network Unit also support QoS based ITU-T Y.1291, VLAN based on IEEE 802.1Q, the one with WiFi also complies with 2.4GHz based on 802.11b/g/n.

Product Specifications Of FA-EONU8081

Special Characteristics

Full speed without blocking exchange

8K MAC address table

Support Full Range VLAN ID

Support QinQ VLAN,1:1VLAN,VLAN Trunk etc.

support port monitor, port mirror ,port speed limit ,port SLA etc.

QoS based on interface,IEEE 802.1p,IPV4(ToS),Diff-Serv,IPV6,802.1Q VLAN ID,destination MAC or source MAC.

The Ethernet interfaces according to the specifications of the IEEE802.3.

128-bit AES encryption algorithm.

According to 802.1x remote management and user authentication

Support CTC2.1 standard

Complies with 2.4GHz IEEE802.11n v2.0 and backward compatible with IEEE 802.11b/g standards

Supports NAT/NAPT IP sharing

WAN Protocols: PPPoE/Static IP/PPTP/DHCP

Supports advanced 2T2R MIMO technology to enhance the throughput and coverage range significantly

High speed data rate - up to 300Mbps

Supports Virtual Server and DMZ

Supports Wi-Fi Protected Setup (WPS) with reset button

Supports 64/128-bit WEP encryption and WPA-PSK, WPA2-PSK security

Supports WMM function to meet the multimedia transmission requirement

Supports WDS mode

Supports Special Applications (Port Triggers)

Supports DDNS (DynDNS, TZO), and QoS

Supports MAC/IP filtering and URL blocking

Supports DHCP server and Anti-Dos firewall

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.