2.4GHz Optical Network Termination Device , External WiFi GPON ONT Optical Modem ONU

FA-GONT8010-KW , GPON ONT ONU Optical Terminal Unit With One Fast Ethernet Port And External WiFi

Upstream And Downstream Data Of ONU and OLT

In the PON port parameters, there are two wavelengths, 1310nm for uplink and 1490nm for downlink. Generally, PON system transmits uplink and downlink data simultaneously with the same optical fiber but different wavelengths are used in all directions. The most common solution is to use coarse wavelength division multiplexing (CWDM), which uses 1490nm or 1550nm for downstream and 1310nm for upstream.

And the signal processing methods also different for upstream and downstream. In the upstream direction, each ONU must use a multiple access protocol such as multiple time division to access TDMA (Time Division Multiple Access) protocol and complete the information access of shared transmission channel. OLT can assign a slot for each ONU and each ONU is allowed to send data in their own time slot so that they will not interfere with each other and avoid unnecessary data conflict.

The downlink data stream is broadcast, all ONU can receive the data from OLT but the ONU receives its own data according to the Logical Link Identifier (LLID) of the downlink data and discards the data for other users. Means it will filter all information then keep its own information and give up other information.

But the situation is a different for OLT. In downlink, OLT can send data to any ONU in any time, in the uplink direction, OLT is able to receive data from a ONU only at the same time,if two ONU sent data the OLT at the same time, the OLT cannot receive data correctly (ONU conflict). In uplink, divide occupation time of the fiber to different times according to a certain length, in each period, only one ONU can occupy the fiber to send data to the OLT, the rest ONU will turn off the laser. OLT specifies the time to send data to the ONU by sending a control packet.

As for POTS, it will coupled all uplink data to an optical fiber and distribute downlink data to each ONU;

In order to avoid data collision and achieve signal synchronization, OLT and ONU have to realize automatic ranging and allocate uplink Bandwidth according to the user's SLA (Service Level Agreement).

Product Features Of FA-GONT8010-KW

Conform to ITU-T G.984 GPON standards.

Support Ethernet service layer 2 switching and wire-speed forwarding of uplink and downlink services

Support frame filtering and suppression

Support standard 802.1Q Vlan function, support VLAN conversion

Support 4094 VLANs (802.1Q)

Support Dynamic Bandwidth Allocation (DBA) function

Support QoS, including traffic flow classification, priority marking, queue and dispatch, traffic shaping and traffic control, etc

Single ONU supports up to 1 LLID.

Support IGMP Snooping

Support Ethernet port ratelimit loop detection

Support power failure alarm

Support lightning protection for power supply and lightning protection for service port

Complies with 2.4GHz IEEE802.11n v2.0 and backward compatible with IEEE 802.11b/g standards

Supports NAT/NAPT IP sharing

WAN Protocols: PPPoE/StaticIP/PPTP/DHCP

Supports advanced 2T2R MIMO technology to enhance the throughput and coverage range significantly

High speed data rate - up to 300Mbps

Main Specifications

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.