Carrier Grade Single Mode Optical Fiber Patch Cord SC To LC Duplex Fiber Jumper

FAPC-SPLPS2 , Carrier Grade Single Mode Optical Fiber Patch Cord SC To LC Duplex Fiber Jumper

Performance of optical fiber patch cord, first of all optical performance, in addition also need to consider interchangeability, repeatability, tensile strength, temperature and the mating times.

(1) Optical performance: Insertion loss and return loss are two basic parameters of optical fiber optic patch cord. Insertion loss is loss of connection, refers to the loss of the effective optical power of the link caused by the introduction of the connector. Insertion loss should be as small as possible, the general requirement should not be greater than 0.5dB. Return Loss refers to the suppress ability of the patch cord to the optical power reflection of the link, and its typical value should be no less than 25dB (MM). As for fiber patch cord in practical applications, the surface of the ferule has been polished by special polishing machine and it made greater return loss, generally not less than 45dB.

(2) Interchangeability and repeatability: optical fiber optic jumper is a universal passive device, of as for same type fiber optic patch lead, they can generally be used in any combination, and can be used repeatedly, so the additional loss are generally less than 0.2dB.

(3) Tensile strength: for a finished fiber patch cord, generally required tensile strength should not be less than 90N.

(4) Working temperature: General requirements, the optical fiber patch cord must be used normally in -40℃ ~ +70℃ temperature range .

(5) Mating times: the current use of fiber optic jumper can generally plug and unplug more than 1000 times.

Main Parameters Of FAPC-SPLPS2 Fiber Patch Cord

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.