Sliding Drawer Fiber Optic Patch Panel With Angled SC Simplex Adapter Port 24 Cores

FA-FDR1MD24F, Sliding Drawer Fiber Optic Patch Panel With Angled SC Simplex Adapter Port 24 Cores

Drawer type fiber optic patch panel is now becoming a common product in fiber optic cabling system, especially in high-density cabling environment such as data center and server room. Unlike the traditional fixed type fiber terminal box, the drawer type fiber patch panel is convenient for people to easily operate the fiber in the fiber optic patch panel, and it can protect the optical fiber very well. In addition, the drawer type structure is also beneficial to high density wiring and good cable management. However, because the fiber is relatively fragile, it is very easy to be damaged due to pulling, bending or squeezing, therefore, it should be very careful when install fiber in the drawer type fiber optic patch panel.

Generally speaking, the installation of drawer type fiber optic patch panel can be divided into three steps: installing fiber patch panel on the rack, introducing fiber optic cable into the optical fiber distribution box, and planning the optical fiber path in the fiber optic patch panel.

1, Install drawer type optical fiber patch panel on the rack. This step only needs to install the bracket on both sides of the fiber optic path panel, and then fix the bracket to the specified position of the rack with screws.

2, Introduce optical fiber cable into drawer type fiber patch panel. After fixing the drawer type optical fiber distribution box on the rack, the optical cable can be introduced into the patch panel through the access hole. The cable is usually pre-terminated branch fiber optic jumper or fiber optic pigtail.

3, Route cable inside the drawer type optical fiber patch panel: because the front panel of the drawer type fiber optic patch panel can be pulled out and pushed in, the cable length inside the distribution box should be long enough to ensure that when the front panel of the fiber patch panel is completely pulled out, the fiber optic cable will not bear too much tension.

It is necessary to use cable tie to fix optical fiber cable in the position of cable entry and dividing point. After fixing the cable trunk, we can start the routing of the branch fiber cable. In this process, we should pay more attention to the bending radius of each fiber cable.

Specification Parameters Of Angled Fiber Patch Panel

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.