Product Details
Natural Transparent Phthalate Free Plasticizers High Thermal
Plasticity
What are the commercially available non-phthalates?
- Terephthalate Esters and Ring Saturated Variants of Orthophthalates: These non-phthalate plasticizers are offered at a competitive
price but have limited compatibility with PVC and decreased
solvency vis-à-vis orthophthalates, and they are too volatile for
some applications.
- Vegetable Oil Derivatives-Epoxides: There is a wide variety of this natural type of non-phthalates
plasticizer. This cost competitive product has limited
compatibility with PVC, decreased solvency vis-à-vis
orthophthalates (triglycerides), relatively high viscosity
(triglycerides), poor low temperature properties (triglycerides)
and volatility (monoglycerides, esters of fatty acids).
- Citrate Esters: Citrate esters have a long history of commercial
use and are also cost competitive with widely used phthalates. This
natural product, however, has limited compatibility with PVC,
relatively poor low temperature properties, relatively high water
extractability and hydrolysis issues.
- Phosphate Esters: Used for flame retardancy, this non-phthalate plasticizer is more
costly and volatile.
- Aliphatic dibasic acid esters: This is another cost competitive phthalate-free alternative that
has a long history of commercial use as a plasticizer. Its
plasticizing efficiency and low temperature properties are among
its greatest advantages. However, it has a limited compatibility
and decreased solvency vis-à-vis phthalates.
- Alkyl sulfonic acid esters: Also cost effective and with a satisfactory plasticizing
efficiency, this non-phthalate plasticizer has a high specific
gravity and is slightly defensive on low temperature properties.
There are relatively few suppliers that distribute it.
- Trimellitate esters: Non-phthalates with a long history of commercial use as a
plasticizer, trimellitate esters are more costly and contain small
amounts of orthophthalates.
- Benzoate/dibenzoate esters: Benzoates have been commercially available for a long time.
Monobenzoates are quite volatile, while dibenzoates have poor flow
properties and relatively poor low temperature properties.
- Polyol-carboxylic acid esters: There are limited supply sources for this non-phthalate
plasticizer.
- Polymeric plasticizers: There is a variety of choices ranging from low to high MW
polyesters (liquids) to alloying polymers. Among its disadvantages
are: high viscosity, high melt viscosity, low solvency, poor low
temperature properties (some), water sensitivity (some),
Specification:
TYPICAL PHYSICAL-CHEMICAL PROPERTIES |
Appearace | Transparent light yellow oily liquid |
Chroma(Pt-Co)# | ≤40 |
Acid value mgKOH/g | ≤0.3 |
Heat Loss(125 oC,2 h), % | ≤0.5 |
Density,(20°C, g/cm3) | 1.08-1.11 |
K Viscosity(cst,40 oC) | ≤50 |
Flash Point, oC | ≥190 |
Storage:
Handling: Provide adequate ventilation and keep away from spark,
excessive heat and ignition source. Storage: Keep container tightly
closed in a dry and well-ventilated place.
The storage temperature should be lower than 45°C, the viscosity
will be increased significantly when the temperature fall below
15°C, if the temperature lower than 5°C, it would become creamy
solid and can recovered to normal appearance while the temperature
is restored to 25-40°C.
Quality standard
The product meets GB/T 5761-2006 standard with its physical and
chemical properties meeting requirement in table below:
1. The user can choose any one from vifscosity number, K value
,index of average polymerizapion degree.
2. The user can confer with the manufacture if they have other
index ,requirement ,on thermal stability.
Company Profile
Xiamen Jingtuo Chemical Co., Ltd is a manufacturer and supplier for
various kinds of top quality PVC plasticizer and PVC resin podwer.
It locates in one of the most beautiful cities Xiamen, engaging in
fine chemicals, plasticizer industry and the relevant service like
industry investment, trading and distribution. The customers of
Jingtuo distribute in more than 20 countries and regions.
Tyban Company mainly runs the business of our own subsidiary
factories including JING TUO CHEMICAL CO.,LTD, Cnchain Chemical
Factory and Quanzhou Tikun Synthetic Material Factory. We carry out
our marketing combining manufacture, sales and customers service
and after-sales service. Tyban integrates commercial practice and
social value. Pursuing sustainable development, environm
entfriendly and devote to be establish conservation minded society.