Custom Thermal Oil Steam Generator , Portable Industrial Steam Generator Reliable
Brand Name:Yuji
Certification:ISO CE
Model Number:LSS Oil Fired Steam Generator
Minimum Order Quantity:1 set
Delivery Time:15 days
Place of Origin:China (Mianland)
Contact Now
Add to Cart
Active Member
Location:
Xinxiang Henan China
Address:
Jingye Park International Building, Xinxiang
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Product Discription
LSS Oil Fired Steam Generator
The vertical steam provided by the LSS accepts the structure of the vertical pipe. A special protective tube between the two lower rings and the upper and lower protective tubes produces three gases. Zoom in and burn
The heat efficiency of the heat sinks and capacitors can be from 93 to 100%. Use a steam water separator and external steam. The water dispenser saves high quality dry fuel, reduces system size and extends service life.
Product Features
1. Easy to maintain:
There is an inspection door at the bottom for checking and cleaning the inside of the oven for easy maintenance.
2. Must meet environmental requirements:
Efficient and reliable burners burn all fuels, but greatly reduce the emission of hazardous waste. The test results from various departments show that the gas (gas) steam meets the environmental requirements of the environment.
3. The amount of evaporation can be increased:
The steam engine can be designed by many units (without restriction) and can be controlled by a computer. You can add shared tasks. The plant produces a large amount of steam energy (water purification, pumps, burners, electronic control panels and main valve blocks).
4. Installation completed:
Water, electricity and steam pipes can be connected to the site, saving time and installation work.
5. Reliable accessories:
Provide vodka, control box, water purifier and valve, national pump quality equipment support. The support system provides safe and reliable steam action to achieve and improve the quality of steam power.
Technical Parameters
| Main Technical Reference for Fuel (Gas) Steam Generator | ||||||
| Item Unit | LSS0.05 | LSS0.1 | LSS0.15 | LSS0J2 | ||
| Rated evaporation | Kg/h | 50 | 100 | 150 | 200 | |
| Rated Pressure PTEPREppoPressure | MPa | 0.4/0.7 | ||||
| Rated steam temperature | c | 151/171 | ||||
| Rated feed water temperature | °C | 20 | ||||
| Evaporator efficiency | / | >92% | ||||
| Applicable Fuel | / | Gas light oil | ||||
| Theoretical fuel consumption | Gas | NM3/h | 4 | 8 | 12 | 16 |
| Light Oil | Kg/h | 3.3 | 6.5 | 9.8 | 13 | |
| Gas supply pressure | mbar | 60- 100 | ||||
| water volume | L | <30 | ||||
Note: The fuel consumption in the table is based on the low calorific value of biomass particles 17084 KJ/Kg (4085 Kcal/Kg).Calculations show that if the low calorific value of biomass fuel is higher than that, the corresponding fuel consumption will be more economical than the values in the table.
| Configuration and Interface Size of Fuel (Gas) Steam Generator | ||||||
| Item Unit | LSS0.05 | LSSO.l | LSS0.15 | LSS0.2 | ||
Outward Size of Main Engine (length * width * height) | / | mm | 620*620*830 | 690*690*968 | 750*750*1130 | 800*800*1286 |
Transport Dimension | / | mm | 206 | 252 | 303 | 350 |
| Mainframe Transport Weight | DN | mm | G 1/2- | Gl' | Gl" | G 1* |
| Main Steam Valve Pipe Diameter | DN | mm | Gl/2" | Gl/2- | Gl/2- | Gl/2° |
| Feed Water Valve | DN | mm | G1 1/4” | G11/4- | G11/4- | G11/4- |
| Safety Valve Diameter | DN | mm | Gf | GF | Gl" | Gl" |
| Drain Valve Pipe Diameter | DN | mm | 133 | 133 | 159 | 159 |
Remarks: We will reserve rights to change the above mentioned data due to continuous policy transformation and product improvement.
Custom Thermal Oil Steam Generator , Portable Industrial Steam Generator Reliable
Inquiry Cart
0