Carbon Steel Metal Slitting Line High Precision PLC Control Easy Install
Brand Name:YBT
Certification:CE ISO SGS
Model Number:YB952608
Minimum Order Quantity:1 Set
Delivery Time:60-90 days
Payment Terms:T/T
Contact Now
Add to Cart
Active Member
Location:
Wuxi Jiangsu China
Address:
No.106, north changjiang road, new district, wuxi china
Supplier`s last login times:
within 25 hours
Product Details
Company Profile
Product Details
PLC Control System Metal Slitting Line High Precision Steel Slitting Machine
Metal Slitting Line Working procedure:
In the beginning, the coil is loaded on the coil car by crane and
brought to the uncoiler by operating the coil car. Coil car
centralizes the coil with the uncoiler mandrel and the coil is
mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates
the coil. Peeler breaks the straps and brings the pre end upto
Pinch roll. The Pinch roll drives the coil end upto the slitter.
Then its drive is disconnected. Slitter moves the slitted strips
further. Slitted strips are threaded through loop table and drag
tensioner into the recoiler drum. Recoiler winds one turn on loose
coil.
Parameters
| Description | Technical Parameters | |||
Raw Material Parameters | Raw material | Carbon steel | ||
| Thickness | 1 - 4mm | |||
| Width | Max.1250mm | |||
| Coil OD | ≤Φ1600mm | |||
| Coil ID | Φ480mm~Φ520mm(Customerized) | |||
| Coil Weight(Max) | 10T | |||
Finished Product Parameters | Slitting blade shaft | Φ200 | ||
| Blade specification | Φ340×Φ200×10 | |||
| Material of blade | 6CrW2Si | |||
| Material of leveling roller | Gcr15 | |||
| Diagonal tolerance | ≤±2mm(L=2000mm) | |||
| Length tolerance | ≤±1mm/2000mm | |||
| Line speed | ≤30m/min | |||
| Power of slitter | 45KW | |||
| Power of recoiler | 55KW | |||
| Voltage | 380V,50HZ,3Phase or customerized | |||
Descriptions:
Components of the 1250mm semiautomatic slitting line: coil car,
hydraulic decoiler, slitter, hydraulic tension station, hydraulic
recoiler
Composed device:
1. Decoiler
The motor will drive it running and help the decoiler to feed the
material to the next device
It can expand and shrink to meet the different coil Inner
diameter's requirement.
It is one of the important part of the slitting line
Capacity: 5T
2. Slitter
At the entry part, it is equipped with the side guide device to
prevent the sheets not directly go into the slitter
Steel slitting line' s slitter part designed with the bracket
movable structure to make it easy to adjust the slit width
It should be equipped with the blades, shim , bakelite plates or
the rubber band to make the slitting possible
3. Scrap winder
In the slitting line it is designed to receive the waste materials
on both sides
And a shaft with the 5.5 KW motor to wind the material with speed
adjustment
4. Tension stand
Two shafts will be equipped with spacers to divid the strips one by
one
The press device with felted woolen will create the first tension
part to ensure the tight and even recoiling quality
The press part is adjustable as per the various thickness
requirements
5. Recoiler
The press arm will divide the strips one by one and create the
tension with the tension stand
The motor makes the speed adjustable
Recoiler is the most importmant part of the whole steel slitting
line.
Layout of the whole line
Decoiler----Pit 1------Slitter-----Scrap WInder------Pit
2------Tension stand------Recoiler
Carbon Steel Metal Slitting Line High Precision PLC Control Easy Install
Inquiry Cart
0