Curving Machine Silo Roll Forming Machine / Steel Silo Roll Forming Equipment

10T Hydraulic de-coiler

• Width of feeding: 1250mm
• Capability: 10 Ton
• Inter diameter: 470-520mm
• Maximal out diameter: 1500mm
• Working speed: 0-15m/min adjustable
• Main motor power: 7.5KW AC motor
• Hydraulic power: 5.5kw

Hydraulic press and leveling device

• Hydraulic shovel head, hydraulic power shovel-head etc feeding steel plates.
• 4KW motor drives the uncoiling rollers to uncoiling the coils. Hydraulic control the press device and shovel table lift up and down and extend and shrink.
• It is include leveling device.

Roll forming

• Thickness range:5.0mm
• Main motor power:110kw
• Roll station:20stations
• Roller material:Gcr15 bearing material chrome plated surface with hardness 58-62 degree
• Shaft diameter: ￠160mm material: SAE1045 with quenching and tempering
• Transmission: by gear box
• Machine adopts wire-electrode cutting structure

Track Punching system

• Base on customer provide punching drawing, this machine need adopt 2 units hydraulic punching system
• Servo motor: 4.4KW
• Hydraulic power: 30kw
• Working pressure:25Mpa adjustable
• The punches and dollies will be CR-12, hardness HRC 58-62.

Hydraulic cutting

• Cutting mode: Cut the sheet after roll forming to required length with stop
• Uses two hydraulic cylinders for operation shall include a flow regulator to achieve a uniform lowering knife.
• Cutting power by hydraulic: 30KW, share the same one to punching
• Working pressure: 25Mpa adjustable(according the final design)
• Material of blade:Cr12 with heat treatment 58-60°
• Length measuring: Automatic encoder length measuring

Transmission table

• Connect from cutting to curving machine
• Transmission power:2.5kw AC motor
• Table size: length in 5m

Curving machine

• Structure; adopt wall panel design, base frame adopt complete welding design to make sure the machine in strong
• Main motor power: 15kw, AC motor
• Roll station: 3 rollers for bending, 2 rollers for feeding
• Roller material: ASTM52100, chrome plated surface with chrome, CNC, HRC58-62 degree.
• Diameter of shaft: 120mm
• Driven by gear
• Minimum radius to work: 24 "(600 mm)

• Hydraulic power: 30kw
• Working pressure: 25-30Mpa adjustable

• Solenoid valve: 3 groups (1 for cutting and 2 for punching)
• Hydraulic oil: 46# hydraulic oil

• The programmable setting of profile length and quantity
• Operating system language: English and Chinese
• Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
• Length inaccuracy can be amended easily.