KSD9700 BK05 Thermostat Plastic shell 40C Normally closed Thermal switch
Brand Name:Yusheng
Certification:CQC,TUV,UL,VDE,ROHS
Model Number:BK05-A
Minimum Order Quantity:1000PCS
Delivery Time:5-7 working days
Payment Terms:T/T, Western Union
Contact Now
Add to Cart
Site Member
Location:
Dongguan Guangdong China
Address:
No.3048, 3rd Building International Plastic City, Renzi Yuan Village, Xiegang Town, Dongguan Guangdong,China
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
KSD9700 Temperature Controller Switch, H20 Thermal Cutoff Fuse 250V 5A 10A 50-150 Deg C
Quick Detail:
| Model | BK05-A |
| Reset Type | Auto Reset |
| Single Pole,Single Throw(SPST) | |
| Case Material: | Plastic or Metal |
| Rated Voltage & Current | 250V AC 5A/10A |
| Contact Type | Normally Closed(Open on Rise) or Normally Open(Close on Rise) |
| Operating Temperature Range | 45～150℃ |
| Temperature tolerance | ±5.0℃ |
| Contact Resistance | ≤50mΩ |
| Insulation Resistance | ≥100MΩ |
| Dielectric Strength | ≥1500V |
| Life Cycle | 10,000 Cycles |
| Certificate | CQC,TUV,UL,VDE,ROHS,REACH |
1 Product application:
BK05-A thermal protector has the characteristics of small volume, insulation of Shell, sensitive action, long service life and so on, and is widely used Suitable for split horsepower motor, light ballast, transformer, Automobile Motor, integrated circuit and general electrical equipment Double protection of overheating and overcurrent.
2 Structural features:
BK05-A series of thermal protectors are bimetallic sheets with a
certain geometric shape, without auxiliary mechanism, only relying
on the self-contained bimetallic sheets Body temperature and
current thermal effect make the state of bimetallic components
change rapidly, and directly drive the contact to realize automatic
cut-off and connection. Circuit, plays a role in overheating and
overload protection.
3 Structural Drawing
| No. | Name | Material | Qty |
| 1 | Case | PBT | 1 |
| 2 | Moveable spring piece | Beryllium bronze | 1 |
| 3 | Bimetallic strip | BR-1 | 1 |
| 4 | Moveable contact | AgNi10/Cu | 1 |
| 5 | Sealing | Epoxy resin | Few |
| 6 | Lead wire | 0.75mm² black silicon wire | 2 |
| 7 | Base | Brass H62 | 1 |
| 8 | Stationary Contact piece | AgNi10/Cu | 1 |
| 9 | Insulation blcok | PBT-VG30 | 1 |
| 10 | Tinning | Tin | Few |
4 Product appearance
Plastic case: 15mm × 6.5mm × 3.1mm The shell of the thermal
protector shall not have burrs, cracks, deformation, corrosion and
other phenomena; The logo should be correct, correct, clear and
durable;
5 Product Performance
5.1 Rated current (COS =0.7) DC24V-10A, AC250V-5A 5.2 Disconnect
temperature: 30℃ ~ 150℃ Reset temperature: 20℃ ~ 110℃(see the
drawing for details). 5.3 Tensile test: the lead end of the product
should be able to withstand tension greater than or equal to 20N,
and the wire will not break or slip out. 5.4 Insulation voltage: a.
The product should be able to withstand AC660V between the leads at
the time of disconnection, lasting for 1min without breakdown and
flashover phenomenon; b. The product can withstand AC1800V between
the lead and the insulating shell for 1S without breakdown and
flashover phenomenon; 5.5 Insulation resistance: Under normal
conditions, the insulation resistance between the lead wire and the
insulation housing should be more than 100MΩ. 5.6 Contact
resistance: The contact resistance of the product shall not be
greater than 50mΩ. 5.7 High temperature resistance test: The
product is placed in the air environment above the rated operating
temperature of 50℃ for 96h. 5.8 Low temperature resistance test:
The product is placed in -40℃ air environment for 96h. 5.9
Anti-vibration test: the thermal protector should be able to
withstand the amplitude of 1.5mm, the frequency change of 10 ~
55Hz, the scanning change cycle of 3 ~ 5 times /min, Vibration
direction X, Y, Z, each direction of continuous vibration for 2h.
5.10 Drop test: The product falls freely once from a height of
0.7m. 5.11 Compression test: The product should be able to
withstand 100N static pressure for 1min. After 5.7,5.8,5.9,5.10 and
5.11 tests, the following conditions should be met: a. The change
of disconnection temperature should be within +7℃ of the initial
value; b. Contact resistance should be less than 100mΩ; c. The
shape should have no obvious deformation; d. The conductor has no
cracking damage.
6 Service Life
Under the condition of rated voltage, current and power factor of
0.7, the product is operated 4000 times by an external heat source,
and the following conditions should be met: a disconnect
temperature change should be within the initial value of +5℃; b
Contact resistance should be below 50mΩ; c Continue the test to
6000 times can move.
7 Other Matters:
7.1 The heating rate of the disconnected temperature detection
should be controlled as 1℃/1min; 7.2 The product cannot bear strong
impact force and compression force during use;
Heat protector effect diagram: product model, operating temperature, certification mark, etc. are shown in the following figure.
Competitive Advantages:
8 Thermal protector action reset temperature reference table
Tag:
Snap-action Thermostat, Resetable Thermal Cutoff Switch,
Temperature Cutoff Switch
KSD9700 BK05 Thermostat Plastic shell 40C Normally closed Thermal switch
Inquiry Cart
0