2100mm Width Low Noice Shuttleless Weaving Machine With Long Life
Brand Name:JingLian
Certification:IATF16949:2016
Model Number:ZWJ--2100B
Minimum Order Quantity:1 Set
Delivery Time:25 Days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Active Member
Address:
Wugong Industrial Development Zone, Raoyang County,Hebei Province, China
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
2.2 kw 1600mm Width Low Noice Shuttleless Weaving Machine For 40-400 mesh/inch
Summary
The light-duty metal wire net weaving machine is applicable for the industry of metal wire net weaving, and it can be used to weave mesh nets, microgroove nets and other nonmetal nets. The products weaved are widely used in various industries including petroleum, chemical industry, machinery, and aviation, etc.
Main features
- It is highly adaptive to metal wires.
- It has a large range for adjustment and can weave in various patterns including plain weave, tilted weave, bead pattern, and tapered contrast microgroove.
- The weft wire is linearly led in without any shuttle, the warp line feeding and take-up are carried out mechanically and automatically, the opening size is small, and the net surface is flat and orderly without any defects.
- It works automatic stopping and displaying functions at any warp broken or weft broken.
- The whole machine works stably in a low center of gravity and a low
level of noise.
Main Parameters:
| TYPE | ZWJ-1300B | ZWJ-1600B | ZWJ-2100B |
| MESH SIZE | 40-400mesh/inch | 40-400mesh/inch | 40-400mesh/inch |
| WIRE DIAMETER | 0.025-0.200mm | 0.025-0.200mm | 0.025-0.200mm |
| BEATING-UP FREQUENCY | 70 r/min | 70 r/min | 70 r/min |
| MESH WIDTH | 1300mm | 1600mm | 2100mm |
| MOTOR POWER | 2.2kw | 2.2kw | 2.2kw |
| OVERALL SIZE | 2.6m*2.8m*1.4m | 2.6m*3.1m*1.4m | 2.6m*3.6m*1.4m |
Main components and specification
In the direction of the technical flow for weaving, it mainly consists of: take-up unit, weft beating-up unit, opening unit, and warp feeding unit, etc.
Operation
- The weaving machine can be operated through press buttons and turn knobs, shown as Fig. 1.
Forward | Inch | Stop | Reverse | Manual | Automatic |
О | О | О | О | О | |
- The weaving machine can be started up and stopped at any running position.
- It has the function of automatic stop and red/green light indication at weft or warp broken.
- Turn the knob to the MANUAL stage to release the motor brake for manual trial running and adjusting.
- Turn the knob to the AUTOMATIC stage and then press the FORWARD button to bring the weaving machine into normal operation.
- At a fault of weft broken or warp broken, the weaving machine will be automatically stopped and the red/green light will give an indication. The weaving machine can be brought back into normal operation after the fault is removed, the STOP button is pressed down, and the indicator is turned off. If the indicator does not turn off when the STOP button is pressed down, and the weaving machine can not be brought back into normal operation even by pressing down the FORWARD button, it means the fault hasn't been removed yet.
- When necessary, the weaving machine can be stopped at any running position by pressing down the STOP button.
- The weaving machine will be brought into reverse running by pressing down the REVERSE button. Usually reverse running is required at any weft broken, but it is recommended not using this function frequently otherwise the rapier will break off the warp line or the motor will be damaged because of overheat.
- The weaving machine will be inching by pressing down the INCH button, but it is recommended not using this function otherwise the motor will be damaged.
- Installation and Tiral Operation
2100mm Width Low Noice Shuttleless Weaving Machine With Long Life
Inquiry Cart
0