Anti Slip Wood Effect Porcelain Floor Tiles / Glazed Porcelain Stoneware Tile
Brand Name:BOLI
Certification:3C certificate ; CE certificate
Model Number:FP88A92
Minimum Order Quantity:500 sgm
Delivery Time:7DAYS , if no stocks need 25days produce
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Foshan Guangdong China
Address:
2Floor, 9-11 , North District 4 Block , Hua Yi International Expo Mall , Wugang Road, Chancheng Area, Foshan City , Guangdong , China.
Supplier`s last login times:
within 43 hours
Product Details
Company Profile
Product Details
Anti Slip Wood Effect Porcelain Floor Tiles / Glazed Porcelain Stoneware Tile
Wood Effect Porcelain Floor Tiles Introduction
R9 anti slip, glaze porcelain polished tile ,using ink-jet transparent glaze technology,have 4 different patterns,double zero water absorption,the friction coefficient ≥0.5.
Wood Effect Porcelain Floor Tiles parameters
| Model | Wooden Stone Tile FP88A92 | |||
| Name: | Chora Wooden Stone Porcelain Tile | |||
| Material | Porcelain tile | |||
| Product Dimensions | 36 x 36 inches | |||
| Thickness | 11mm | |||
| Finish | glaze porcelain polished surface | |||
| pattern | 4random patterns | |||
| colors | Beige mix color | |||
| Shade Variation | V4-substantial variation (Color Variation within each tile ) | |||
| Absorption rate | <0.5% | |||
| Abrasion resistance | 6 - commercial considerable traffic | |||
| Function | Chemical resistant and Frost resistant, Acid-resistant, Antibacterial, Heat insulation, Wear-resistant | |||
| Usage | Use in indoor and outdoor floor and wall | |||
| Size(mm) | Pcs/ctn | M2/ctn | Kg/ctn | Ctn/pallet |
| 800x800 (36'x36') | 3 | 1.92 | 51 | 28 |
| Guidelines: widely used in the living room, toilet, kitchen wall floor, flagship store, can also be laid outdoors. |
| Process characteristics: Can keep color for a long time, hard and wearable, suitable for use in most indoor spaces except toilets and kitchens. |
| Glaze: Concave-convex grinding face plus flash glaze, non-slip, easy to clean. |
| Design pattern: Multiple patterns combination, can be mixed with multiple colors. |
| 1, when opening the box, should recognize the product specifications, dimensions, color number, etc., the same color number of the product affixed to the same position, do not mix the products of different color numbers together pasted(unless consciously required to obtain |
| Special decorative effects in the figure) |
| 2, before pasting first on the ground test, after using the same color number and size, you can use the adjacent color number and size, and different color number, size tile classification, and then in the bottom of the brick for use |
| Number to indicate. If the brick surface has a pattern or directional pattern, the product should be unified according to the direction of the pattern, in order to best decorative effects. |
3, at present, the tile pasting mostly uses wet pasting and dry pasting two methods. |
| 4, when paving the floor brick, it is recommended that the surface area of cement mortar paving should not be too large, so as not to find the surface cement mortar more than the initial coagulation time(about 45 minutes), resulting in the tile and adhesive layer adhesion is not dense |
| Real, causing quality problems such as air drums. |
| 5, when leaving seam pasting, polished brick spacing 2mm-5mm is appropriate. The polished brick and the wall junction leave a seam of 3mm-5mm. |
| 6, pasting should be carried out after the base is compacted. When tiling tiles, the tiles and the pasting surface are first presented at a certain angle(about 15 degrees), and then pushed gently to the horizontal direction by hand to balance the bottom of the brick and the pasting surface. |
| This facilitates the elimination of bubbles; Then tap the brick surface with a hammer handle, so that the bottom of the brick can eat pulp, so as not to produce an empty drum phenomenon; Then knock the brick surface to level with a wooden hammer and measure it with a horizontal ruler to ensure |
| The tile pasting level. |
| 7, the product pasted for about 1 hour(depending on the climate and the degree of cement condensation), we must use the wood bran or sponge to clean the cement mud in time, to avoid the surface contamination time is too long, it is difficult to clean up. |
| 8, about 12 hours after the product is pasted, hit the ground with a wooden hammer in time to check whether there is an empty drum phenomenon. All brickwork should be done in time to remove the surface dirt, 24 hours before walking. |
| 9, pasted tiles within 48 hours, it is best not to use large-scale waxing and other electric equipment, so as not to tile and adhesive layer later shock and lead to unnecessary empty drum phenomenon. |
| Delivery: |
| 1. After payment, we will deliver the goods within in 7 days. If there is any special circumstances, we will inform you in advance. Ceramic goods are shipped through the logistics line. will inform you ETA day . Individual regions need to transfer. The time will be slightly longer. The actual arrival time is based on the logistics company. |
| 2. Goods to your city, the logistics company will call you to the logistics station to pick up goods. |
Wood Effect Porcelain Floor Tiles Details
Anti Slip Wood Effect Porcelain Floor Tiles / Glazed Porcelain Stoneware Tile
Inquiry Cart
0