Anti Corrosion Root Canal Preparation Gates Glidden Drills In Endodontics

Anti Corrosion Root Canal Preparation Products , Gates Glidden Drills In Endodontics

Gates Drills Engine Stainless Steel Single Size #5 Diameter 1.5mm for Access Preparation


Specifications:

Description:

1. Designed with a flame-shaped boring head with a non-cutting guide tip on a slender shaft.

2. Used to reduce the curvature in the orifice of the canal, allowing greater access to the canal for

cleaning and obturation.

3. Instrument size can be easily identified by the number of grooves on each instrument.

4. In addition to the standard 32mm length, 28mm and 38mm lengths are available depending on

whether for molar or canine use, etc

5. Recommended Rotary Speed : 800~1200 rmp

6. To be applied in pulp canal protective

7. To establish the access to root canal ’ s entrance

8. To enlarge the opening of the teeth root canal ’ s crown part

9. To prepare the upper two thirds part of molar root canal crown

Operation Sequence :

1. To be applied in pulp canal protective ;

2. To establish the access to root canal’s entrance ;

3. To enlarge the opening of teeth root canal’s crown part ;

4. To prepare the upper 2/3 part of molar root canal crown .


Warning :

1. Only skilled dentists are allowed to use .

2. Be sure to sterilize this product for each use .

3. Do not use this product except for the dental service and treatment . Use it in accordance with the
intended use .


Precautions for use

1. To prevent infection , sterilize the product by autoclave and make sure sterilization is completed before
using.

2. Choose the most appropriate type for each case and follow the general method .

3. Before using , make sure the instruments outside of dental cavity that there are no deformations ,
scratches and cracks .

4. If the head of product is thin , long or large , there are possibilities for breaking or twisting . Because of
this , be sure to avoid using unreasonable angle and excessive pressure .

5. Wear safety glasses to protect your eyes from damage . Also , wear a dust protective mask to prevent
inhaling dust .

6. Wear rubber dam etc . to avoid accidental ingestion and falling .

7. Do not use this instrument for any purposes except for listed applications above .

8. Only for use by dentists .

9. After using , follow an appropriate treatment as medical waste .

10. Dispose the product if damaged or contaminated .

11. After using , wash it with medical cleaning agent and brush , then wash away foreign substances like
adherent body fluids and body tissues .

12. Set the handle plugger to a stand when cleaned by ultrasonic cleaner to avoid working part
deterioration .

13. Use handle plugger with great care to avoid puncturing fingers because of its possession of sharp-
edged part .


Maintenances and Inspections

1. Sterilize this product by autoclave under established method and term for each use.

Method of sterilization:

Put this product in a sterilization pack or (or foil) and place it on a sterilization tray, or files stand for
autoclave sterilization with reference to the following terms.

Terms for sterilization :

term ( 1 ) temperature : 121degrees Celsius time: 20 minutes or more

term ( 2 ) temperature : 126degrees Celsius time: 15 minutes or more

2. Do not use high pressure steam sterilizer which heats more than 200 degrees Celsius including drying
process .

3. When reusing the instrument, wash away foreign substances completely and sterilize .

4. Regarding use of medical cleaning agent, follow the instruction manual by its manufacturer strictly .

5. Dispose the product if damaged or decreased in performance


Applications :

Competitive Advantage :

1. Gates Drills can be used in any right-angle handpiece to enlarge the coronal portion of the canal for
bulk removal of tooth structure.

2. Imported high quality raw materials , high corrosion resistance , by the refining production , has the

equilibrium and stability of hardness.

Shenzhen Feihuan Medical Instruments Co.,ltd is an integrated professional dental manufacturer in developing,manufacturing,and marketing. We supply full range of the products including various of Niti Taper Files,Endo Motors,Stainless Steel Endo Files,Gates and Pesso,Paste Carriers,Barbed Broaches,Niti Archwires,Springs,Carbide Burs and so on.

Shenzhen Feihuan is dedicated to supplying our customers with best products and service. With the great effort of all the staff, our products are now being sold to the world, and have been obtained a good reputation from customers.