Single Wire And Cable Vertical Flammability Tester For Household Appliances

Durable Single Wire and Cable Vertical Combustion Burner

First, the scope of use (no need to match the air compressor to ensure the accuracy of the test)
The single wire and cable vertical burning tester is mainly for the flammability of a single wire and cable with a conductor diameter greater than 8 mm (cross-sectional area greater than 0.5 mm2) or less than 8 mm (cross-sectional area less than 0.5 mm2). It is suitable for the research, production and quality inspection departments of electrical and electronic products and their components such as lighting equipment, low-voltage electrical appliances, household appliances, machine tools, electrical machinery, power tools, electronic instruments, electrical instruments, electrical connectors and accessories.

Second, product features
The single wire and cable vertical burning test uses a Bunsen burner of a specified size and a specific gas source (propane) to ignite the sample in a vertical state at a certain flame height and a certain flame angle. Test igniting, duration of combustion, and length of combustion are used to assess flammability and fire hazard.

Third, the main technical parameters
1. Burner: inner diameter Φ12mm ± 0.5mm (in accordance with GB/T18380.11) and inner diameter Φ9.5mm ± 0.5mm (in accordance with GB/T18380.21) one Bunsen burner
2. Test inclination: 45°
3. Flame height: adjustable from 20mm ± 2mm to 190mm ± 1mm
4. Flame time: 0-999.9s ± 0.1s adjustable
5. Flame holding time: 0-999.9s ± 0.1s, automatic recording, manual suspension
6. Combustion gas: 95% propane gas (usually liquefied petroleum gas can be used instead)
7. Test process: automatic control of test procedures, no independent ventilation
8. Gas: use high-purity propane gas or petroleum liquefied gas (user-supplied);
9. Tested cable length: 600±25mm;
10. Tested wire and cable outer diameter: conductor diameter greater than 0.8mm or cross-sectional area greater than 0.5mm2
11. The device should be placed in an environment that is not ventilated and has a temperature of (23 ± 10) °C.
12. Burning torch standard power: 1KW;
13. Power supply voltage: 220V/50Hz
14. Box material: Electrostatic spraying of steel plate No solder joint process
15. Studio size: 300x450x1200mm (0.16 cubic)

Fourth, with the goods list
1 Manual 1
2 combustion box table 1
3 Pickups 1
4 Warranty Cards 1
5 Certificate of Compliance 1
6 stainless steel block gauge 1

Five, design standards
GB/T18380.11-2008, GB/T18380.12-2008, GB/T18380.21-2008, GB/T18380.22-
2008, GB/T5169.14-2007

Sixth, applicable standards
IEC60332, GB/T19666-2005, GB12972, GB13033, MT818, MT386, ISO5656
The single wire and cable vertical combustion combustion test machine, also known as the single wire and cable vertical combustion burner, is a comprehensive combustion device that neutralizes the functions of a single copper core wire and cable vertical burner and an insulated wire and cable vertical burner.

Scope of application:
It is suitable for measuring the vertical burning non-spreading performance of single plastic wire, control wire, cross-linking, elevator, marine and mining cable. It can also be used for vertical combustion test of high self-extinguishing low-smoke halogen-free flame-retardant polyolefin insulation and 105°C low-smoke halogen-free flame-retardant olefin irradiation insulation. DJC-1 single wire and cable vertical burning and burning test machine is a device for burning resistance test on single wire and cable. It has the advantages of high accuracy, automatic timing, automatic end test and easy operation.
In line with the standard: GB/T18380.11-2008 single insulated wire and cable flame vertical test test device
GB/T18380.12-2008 single insulated wire and cable flame vertical propagation test 1kW premixed flame test method
GB/T18380.21-2008 single insulated thin wire and cable flame vertical propagation test device
GB/T18380.22 -2008 Single insulated thin wire and cable flame vertical propagation test Diffusion type flame test method
IEC60332-1-2004
GB/T5169.14-2007 Fire hazard testing for electric and electronic products - Part 14: Test flames 1 kW nominal premixed flame equipment, test methods and guidelines
GB/T19666-2005 general rules for fire-retardant and fire-resistant wire and cable
GB12972 mining rubber sheathed flexible cable
GB13033 rated insulated voltage 750V and below mineral insulated cable
MT818, MT386, ISO5656
DJC-1 single wire and cable vertical burning and burning test machine can automatically ignite and turn off the test flame, automatic timing, automatic end test, high accuracy, easy operation and so on. The equipment consists of control box, combustion box, propane combustion lamp, solenoid valve, high pressure igniter, gas pipe, pressure regulating valve, gas flow meter (one propane and air) and signal control line.

The main parameters:
1. Vertical combustion box: the size of the box is W300xH1200xD450mm;
2. Gas: use high-purity propane gas or petroleum liquefied gas (user-supplied);
3. The length of the tested wire and cable: 600±25mm;
4. The outer diameter of the tested wire and cable: the conductor diameter is greater than 0.8mm or the cross-sectional area is greater than 0.5mm2;
5. The device should be placed in an environment that is not ventilated and has a temperature of (23 ± 10) °C;
6. The flame should continuously burn the sample, and the flame burning time T is set in the range of 0.1-999.9 (seconds) continuously;
7. The transfer switch can be manually or automatically selected according to actual needs;
8. Gas flow range: 0.1-1L/min;
9. air flow range: 0.1-1m3 / h
10. box material: mirror stainless steel, no solder joint process
11. Standard power of burning blowtorch: 1KW;
12. power supply voltage: 220V/50Hz

Shanghai Glomro Industrial Co., Ltd was founded in 2012. Specializing in the production of thermal analysis machine, laboratory instrument, analytical instrument, testing equipment, industrial measurements and instruments products. Products of high quality, fashionable, widely used in a variety of industrial areas, not only has the broad masses of the domestic sales market, but also exported to Europe and the United States.
Glomro hinge over the years has always adhered to "quality of products in order to survive, credibility and development services" business purposes. Committed to providing you with high-quality products and quality services. Have a professional, dedicated design management team, from product design, mold making, molding to the Product assembly, for each aspect and processes are rigorously testing and control.

Over the past few years of production and management and exploration, we set up our own quality management system. Industry standards including SAE,IEC JEDEC,ASTM and MIL-STD,ISO:9001,UL,CE certified. Glomro always implement the concept of customer value creation for customers tailored products to meet the needs of different customers, and continuously provide customers with solutions to technical problems,further exploration innovation,and excellence.

We can provide customers with professional and prompt pre-sales, mid-sales, and after-sales support. Warmly welcome you and opening up the boundaries of communication. We synchronize with your ideal partner.