

Add to Cart
Automatic Disc Lanolin Centrifuge Purifier Machine 6500r/Min Speed
Introduction:
Lanolin separators are used for extracting oil and fat from wool-washing waste water and obtaining relatively pure lanolin and meanwhile reducing the cost of waste water treatment.
Feature:
1. Automatic discharge mode, include partly discharge and fully discharge.
2. Applied Labyrinth seal mode, centripetal pump discharge light liquid, with a big outlet pressure, separated light liquid can be directly transported.
3. Centripetal pump system with stable output pressure, large adjustment range, easy operation.
4. Power transmission applied frequency conversion start, running smoothly, no noise and odor pollution.
5. This series disc centrifuge specially designed with safety protection device of automatic control cabinet, all parameters can be adjusted directly r on the touch screen, so that the separation of discharge achieve the best effect.
6. With electric motor protection device (including automatic start-up and normal operation).
7. Small piston with double piston structure, large amount of discharge and more stable, low power consumption, more energy saving.
8. Light or heavy liquid phase outlet could be adjusted by online pressure regulating structure, clarity of light or heavy phase can be adjusted according to end user request.
9. Panel control clear and intuitive, simple and easy operation
Techincal Parameters:
No. | Basic Type | Capacity (L/h) | BasketSpeed (mm) | Motor Power (KW) | Net Weight (kg) |
1 | GDPX328 | 3000 | 6500 | 5.5 | 450 |
2 | GDDR230 | 500 | 6930 | 2.2 | 245 |
3 | GDPX510 | 12000 | 5500 | 18.5 | 1400 |
4 | GDDB307 | 1500 | 6000 | 7.5 | 850 |
5 | GDDB407 | 1500 | 6000 | 7.5 | 850 |
Main parts:
1. In and out of the device
2. drum
3. matching water installation 4.drive system
5. engine base 6.motor, 7, solenoid valves 8, PLC control box.
v Machine starts the friction to start off, about six to ten minutes. the
machine runs smoothly, low noise and vibration, the installation path is very
easy to operate.
v The bearings use imported German FAG brand, transducer using Japan
brand “ Fuji”, the main strengthen parts of Roller body and Roller cover
use 2Cr13,and the other parts of contacted materials such as Disc all
use 0Cr18Ni9(SUS304).
v The Stainless steel cover use SUS304
v The base use casting steel, coating does the same way as ship bottom.
v German burkert brand of the solenoid valves.
v PLC Control achieve self -cleaning and automatically discharging.
Application :
It is widely used in lanolin sludge’s separation, to separate the 4% lanolin with some solid mixture to extract lanolin and recycle some water. It is also applicable to some similar material’s separation, like palm oil.