Advantages:Water Filtration Life System Reverse Osmosis For Commercial Use
1) Our company's RO reverse osmosis equipment adopts key
components, equipment adopts International brand.
2) advanced technology, reliable quality, strong expandability,
reasonable structure and small area.
3) high water utilization rate, low energy consumption, fully
automated operation, simple operation and maintenance.
4) According to user requirements design and manufacture of reverse
osmosis system.
5) The general production limit of 0.25m3/hr, the upper limit is
not limited, the water recovery rate can reach more than 75%, salt
rejection > 98%.
6) The amount of water produced varies with the temperature of the
incoming water and the aging or contamination of the reverse
osmosis membrane.
Water source:Water Filtration Life System Reverse Osmosis For Commercial Use
II. Indicators of commonly used water quality
1. chroma: pure water is colorless, odorless and transparent
liquid, if water with color is mostly caused by impurities in
water. The color of the water is dark and dark, usually expressed
by color. Clean natural water color is generally 15~25 degrees,
containing more humus lake water, reservoir water color can reach
more than 50 degrees.
2. turbidity: natural water contains a large number of suspended
particles and colloids, their common characteristic is to make the
water turbid sense, turbidity is used to reflect the water
suspended matter and colloid on the degree of clarity and
transparency of the water, but also reflect the amount of suspended
matter and colloid in water.
3.pH value: relative content of acid and base in solution. pH value
is the unit of measure of the negative logarithm (log) of hydrogen
ion concentration in water. pH value is divided into 0~14 blocks,
pH value is 7.0, water is neutral; pH value is less than 7.0, water
is acidic; pH value is greater than 7.0. then the water is
alkaline.
4. hardness: refers to the content of calcium and magnesium ions in
the water source, because they can form a hard scale, so called
hardness. In contrast, the process of removing calcium and
magnesium ions in water is called softening,
5. conductance: dissolved charged ions in water will move under the
action of electric field, that is, there is current passing
through, so water is conductive, the conductivity of water is
electrical conductivity, the size of conductivity is proportional
to the amount of charged ions in water, so the conductivity can be
used to reflect the dissolved ion content in water. Electrical
conductivity units :µs/cm...
6. resistance: reciprocal of conductance, unit: MΩ•cm..
Product Index:Stainless Steel Reverse Osmosis Ro System Water Filter
FAQ:Water Filtration Life System Reverse Osmosis For Commercial Use
1. Q: Which machine should I choose?
A: It depends on your raw water quality and your requirements for
permeate water.
Usually there are three parts: pretreatment, RO machine, and post
treatment. Pretreatment could be UF(ultra filtration) system,
anti-scale dosing system, flocculant dosing system, disinfectant
dosing system, water softener, sand filter, carbon filter, security
filter etc. Post treatment could be UV sterilizer, Ozonizer, ClO2
sterilizer, etc. And maybe you need an EDI system. We will choose
proper process according to your raw water quality and permeate
water purpose.
2. Q: What’s your machine material?
A: For pretreatment tanks, we usually use FRP or S.S. The RO frame
could be S.S, carbon steel.For pipes, it is usually S.S and UPVC.
We can choose material according to your special requirements.
3. Q: What’s the control method?
A: For pretreatment, you can choose manual or automatic; for the
whole system, we use relay, PLC or man-machine interface remote
control.
4. Q: Which spare parts need to change regularly?
A: Filter cartridge in the security filter and RO membranes. For
filter cartridge, it needs to change each 3-6 months, and for RO
membrane, you need to change each 1-3 years. It depends on your
water quality and how you maintain the machine.
5. Q: What’s your warranty?
A: Our warranty is 1 year. But to our experience, our machine can
work 5 years before repair.
6. Q: Do you provide installation and training?
A: Yes, we can send our technician to your site for installation or
training. Or you can send your staff to our factory for training.
7. Q: What’s your electricity requirement?
A: Our machine could be 380V/220V/110V, 50HZ/60HZ, 3 phase/single
phase. We can do customer made products.
8. Q: What’s your machine size?
A: It depends on the capacity requirement and we can make changes
according to your space.
9. Q: What’s the purchase procedure?
A:Customer send Inquiry -----we provide solution and
quotation-----customer confirm and place order-----we send
PI-----customer make first payment----we arrange
production----customer make the rest payment-----we ship goods from
our factory.