

Add to Cart
Normally Open Two Wire Inductive Proximity Sensor Good Environmental Resistance
Description
The inductive proximity switch can detect metal targets approaching the sensor, without physical contact with the target.
Features
1. Long life and high reliability, strong environmental resistance
2. Red LED reality can detect sensor working status
3. IP67 protection structure (IEC)
4. Reverse power protection, short circuit protection, can be directly connected to the PLC
5. Economical and simple operation
Details
Two-wire
NPN/PNP
Normally open
AC
Parameter
Lag distance | Less than 10% of the detection distance |
Detecting objects | Magnetic metal (detection distance is reduced when non-magnetic metal) |
voltage | DC : DC 12~24 (6~36V) pulse (p-p) below 10% |
AC : AC 110~220V (36~250V) 50/60Hz | |
Current consumption | N.P : ≤13mA |
D : ≤0.8mA | |
A : ≤1.7mA | |
Control output | N.P : ≤300mA |
D : ≤200mA | |
A : ≤400mA | |
Loop protection | N.P.D : reverse connection protection, surge absorption, load short circuit protection |
A : surge absorption | |
Ambient temperature | -30~+65°C (no icing, no condensation) |
Ambient humidity | -35~95%RH |
Insulation resistance | 50MΩ or more (DC500 megohmmeter) (between charging part and housing) |
Withstand voltage | AC 1000V 50/60HZ 1min (between charging part and Housing) |
Temperature effect | -30~+65°C: detection distance error ±15% at +23°C |
-25~+60°C: detection distance error ±10% at +23°C | |
Voltage effect | 6-36V (90-250V) : ±15% of detection distance error |
10-30V (220V) : ±10% of detection distance error | |
Protection level | IP67 (IEC) |
Material | Housing: ABS |
Detection surface: ABS |
Note:Please read the "Precautions" of the product manual before use.