

Add to Cart
0.22um 10" PVDF PES PTFE Microelectronics Filter Membrane Pleated
Water Gas Filters
General Description
The membrane filter element is made of imported PVDF PES PTFE
membrane and imported non-woven fabric and mesh as the support
layers. The filter outer cage, center core and end cap are formed
by thermal welding technology, no adhesive used. They are produced
in clean room, 100% integrity tested and flushed with high purity
water. Suitable for filtration of weak acid/alkali liquids and high
purity water.
Applications
Electronic industry;
Fermentation tank;
Vent filter of hold tank;
Semiconductor: ultrapure gas filtration;
Chemical industry;
Features
Bigger filtration area guarantees high throughput and long life;
100% integrity test;
Thermal welding, not use any adhesives and surfactants, effectively
reducing the risk of precipitation;
18MΩ pure water flush.
Dimensions
Outer diameter | 2.7" (69mm) |
Length | 10", 20", 30", 40" |
Material of Construction
Model | Membrane Pleated Filter |
Filter Medium | PVDF PES PTFE |
Support/Drainage | Polypropylene |
Center core/Outer Cage/End Caps | Polypropylene |
Seals Material | NBR, Silicone, EPDM, Viton |
Filter Performance
Micron | 0.1um, 0.22um, 0.45um, 0.65um |
Length | 10", 20" |
Interception rate | 100%, 107CFΜ/cm² |
Max. operating temperature | 80℃ |
Max. operating differential pressure | 0.42Mpa at 25℃ |
Max. operating differential pressure | 0.21Mpa at 25℃ |
Applicable PH | 1-14 |