2.7" 0.1-20um 40 Inches Absolute Rating Pp Pleated Sediment Filter
Brand Name:PULLNER
Certification:FDA ISO9001
Model Number:PLZ-PPL
Minimum Order Quantity:1
Delivery Time:8 days
Payment Terms:T/T, Western Union, L/C, D/A, D/P, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
8th Building, No.1132 Maoting Rd., Chedun Town, Songjiang District, Shanghai 201611, China
Supplier`s last login times:
within 31 hours
Product Details
Company Profile
Product Details
222/226 PP Pleated Filters Diameter 2.7" Length 10"/20"/30"/40" Competitive Price Free Sample
Specifications
| Item | Technical Parameters |
| Micron | 0.1um, 0.22um, 0.45um, 1um, 2um, 3um, 5um, 10um, 20um, 30um, 60um |
| Filtration area | 0.4-0.7m² |
| Filter Medium | Polypropylene (PP) |
| Support/Drainage | Polypropylene (PP) |
| Core/Cage/End Cap | Polypropylene (PP) |
| Outside diameter | 2.7" (68.5mm) |
| Max. operating differential pressure | ΔP≤0.35MPa at 25℃ |
| Max. operating differential pressure (reverse direction) | ΔP≤0.28MPa at 60℃ |
| Max. operating temperature | 80℃(Stainless steel support is recommended for temperature exceeds 50℃) |
| Sterilization temperature | 30 minute cycles @121℃ |
| Max. operating pressure | 4.0bar/21℃ |
| 2.4bar/80℃ |
Filtration Efficiency
| PPH | ＞95% | ＞98% | ＞99.8% | ＞99.9% |
| 0.3μm | 0.15 | 0.22 | 0.3 | 0.5 |
| 0.5μm | 0.22 | 0.3 | 0.5 | 0.65 |
| 0.65μm | 0.45 | 0.5 | 0.65 | 0.8 |
| 0.8μm | 0.5 | 0.65 | 0.8 | 1.0 |
| 1.0μm | 0.65 | 0.8 | 1.0 | 3.0 |
| 3.0μm | 1.0 | 2.0 | 3.0 | 5.0 |
General Description
Microporous pleated filter element, the main filter material is :
Polypropylene, Hydrophobic PTFE, Hydrophilic PTFE,Polyether
sulfone, Nylon, etc.
Most of the raw materials are imported from abroad.Pleated filter
element is a kind of deep filtration filter,it is usuaslly used as
liquid overheating,clarification, filtration and terminal filter.
It has the following characteristics: the superfine polypropylene
fiber membrane as the filtration medium, low pressure differential,
high flux, good filtration precision, lower economic cost.
The whole structure of polypropylene, end cover, housing and center
pole adopts polypropylene material; It adopts the hot melt welding
process, PP and PP melt bonding,without any binder.
It has wide range of chemical compatibility, and also has a series
of pore size and form a variety of interface.Material: Pleated
filter, Support layer, End-cover, Inside & Outside cylinder are
polypropylene.
Welding: It adopts the uniquehot melting methods, no glue, no
foreign body fall off.
Typical use: Pharmaceutical, Food, Chemical, Electronics,
Environmental protection, etc.
Microporous membrane pleated filter cartridge main features: High
interception rate, high liquidity, low pressure differential and a
wide range of chemical compatibility;
The production process adopts unique hot melting process
technology, no any adhesive, no foreign body release.
It can meet the food,beverage, beer, chemical, pharmaceutical and
other industries production requirements.
Ordering Information
PPH 0100 10 C1 E
| Series | Micron | Length | End Cap Type | Seal material | |||||
| PPH | 0030=0.3μm | 05=5" | C1 | =226/Spear | E | =EPDM | |||
| 0050=0.5μm | 10=10" | C3 | =222/Spear | S | =Silicone | ||||
| 0065=0.65μm | 20=20" | C5 | =222/Flat | V | =Viton | ||||
| 0080=0.8μm | 30=30" | C6 | =226/Flat | P | =FEP | ||||
| 0100=1.0μm | 40=40" | C9 | =DOE | ||||||
| 0300=3.0μm | |||||||||
| 0500=5.0μm | |||||||||
| 1000=10μm | |||||||||
2.7" 0.1-20um 40 Inches Absolute Rating Pp Pleated Sediment Filter
Inquiry Cart
0