5" 10" 20" 30" 40" PP Melt Blown Filter Cartridge For Food / Beverage
Brand Name:SFFILTECH
Certification:CE
Minimum Order Quantity:1 set
Delivery Time:20-30 days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Place of Origin:China
Contact Now
Add to Cart
Active Member
Location:
Shanghai Shanghai China
Address:
Jianchuan Road, Minghang District, Shanghai, China (Office)
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
5 micron filter cartridge 5"/10"/20"/30"/40" PP Melt Blown Filter Cartridge
♦ Part one: Frotec Filter Cartridge Description
1. Brief introduction and Technical Specification
Frotec high performance PP Melt Blown Filter Cartridges are constructed from high-tech and precisely automatic controlled machines. The cartridges are 100% made of FDA grade polypropylene resin which is ideal for most general filtration requirements. The fiber matrix of the filter cartridge has been engineered to provide structural integrity throughout the long service life and stable pressure drop. Excellent character of non-fiber releasing provides optimum fluid purity and eliminates foaming.
*100% polypropylene construction provides excellent chemical
compatibility with a variety of process fluids and applications.
*Graded pore construction provides optimum particle retention and
prevents media migration, ensuring consistent filtration
performance.
Free of binders, additives and lubricants.
*Low pressure drop, high dirt holding capacity and long service
life.
*Manufactured by FDA grade polypropylene resin.
Type | Melt-Blown Filter Cartridges |
Filter Media | Polypropylene |
Nominal Length | 10'',20'',30'',40'' |
Micron Rating | 1, 5, 10, 25, 50, 75, 100 μm |
End Cap | DOE, 2-222 Flat, 2-222 Fin, 2-226 Flat, 2-226 Fin |
Operating Conditions | 3.0 bar at 21℃, 2.0 bar at 40℃, 1.0 bar at 60℃ |
Applications | Plating Solutions, Pre RO/DI, Chemicals, Petrochemical Process,
Food & Beverage, Electronics |
Material of construction | Filter media | Polypropylene |
Support layers | Polypropylene | |
Micron rating | 0.1,0.2,0.45,0.65,1.0,2.0,3.0,5.0,10,30,50,70,100 um | |
Inner core | Polypropylene | |
outer cage, end cape | Polypropylene | |
Seal method | Thermal bonded, no adhesives | |
O-ring/Gaskets | EPDM, slicone, buna, viton | |
Cartridge dimensions | Outer diameter | 69mm |
Inner diameter | 28 mm | |
Length (based on DOE end Cap) | 10''-254mm,20''-508mm 30''-762mm,40''-1016mm | |
Filtration Area | 0.65m2 per 10 '' | |
Operating conditions | Normal operating temperature | Up to 65 ℃ |
Max.operating temperature | 90 ℃ at p ≤1.0 bar | |
Forward flow direction | 4.2 bar at 25 ℃ | |
Reverse flow direction | 2.1 bar at 25 ℃ | |
Ph value compatibility | 1-14 | |
Sterilization temperature time | Steam sterilization for 30 minutes at 121 ℃,100 cycle, autoclave 30
minutes | |
Cartridge safety | Endotoxin | <0.25 EU/ml |
Extractables | 0.03g/10'' |
Specification of pp spun washable water filter
Material of Construction
• Filter Media: Polypropylene
• Core: Polypropylene or not
• Seal Material:Silicone,EDPM,Buna,Viton,
• Micron Rating: 1µm, 3µm, 5µm, .. 100µm
Dimensions Industrial PP melt blown filter cartridge:
• Outside diameter: 2.5” (62-65mm),4.5"(110-115mm)
• Inside diameter:28mm or 30’’
• Length: 5", 10", 20", 30", 40"
Recommended Operating Conditions
Max. Operating Temperature: 80°C
Max. Differential Pressure: 2.0 bar @ 21°C
Ordering guide of PP melt blown filter cartridge:
| Model PPF | Support Cor | Dimension | Micron Rating | End Adaptor | Seal | Length Inch |
PPF-A Standard PPF-B Thin groove PPF-C Broad groove | P- PP N- None | A- ID28mm OD2.5" B-ID28mm OD4.5" C- ID30mm OD2.5" D-customize | 1:1μm 3:3μm 5:5μm 10:10μm ........ ........ 100:100 μm | 0-DOE 1 - 226/Fin 2 - 222/Fin 3- 222/Flat closed | E-EPDM N-Buna S-Silicone V-Vito | 5: 5" 10: 10" 20: 20" 30: 30" 40: 40" 50:50” |
5" 10" 20" 30" 40" PP Melt Blown Filter Cartridge For Food / Beverage
Inquiry Cart
0