

Add to Cart
KQG-100 Deep Foundation Rotary Down Hole Drilling Rigs Continuous Drilling Blasthole Wheel
1. Product Introduction
High-Pressure Ring Submersible Drilling Rigs are mainly applied in non-coal underground mines, tunnels,irrigation works,and other drilling projects.They feature the comprehensive large-size & deep-hole rock drilling in geotechnical engineering, particularly suitable for underground projects.Besides, they are set to work in tunnels and stopes with height not more than 3.6 meters and no less than 3.2 meters,and the width not less than 2.6 meters. The working environment should be kept ventilated well.
2. Main Technical Parameters
No. | Item | Parameter | Remark | |
1 | Drilling diameter(mm) | 76~127mm | ||
2 | Max. drilling depth(mm) | 60m | ||
3 | Spin head motor speed | 0~60 r/min | ||
4 | Drill boom rotator angle | 0°~360° | 180 ° forward and reverse | |
5 | Max. gradeability | ≥25 %(14°) | ||
6 | Min. ground clearance | 180mm | ||
7 | Weight | 4150kg | Exclude matching parts | |
8 | Rated power | 18.5kW/380V/50Hz | Motor 15kW | |
9 | Dimension | Length | 4500±150 | |
Width | 1670±50mm | |||
Min. operation height | 3100±60mm | |||
Min. walking height | 2624±70mm | |||
10 | Max. thrust | 38 kN | ||
11 | Max. turning torque | 1000 N·m | ||
12 | Max. travelling speed | 1 km/h | 16 m/min | |
13 | Max. disassembly size/mm | 3100×1120×860 | Guide rail(including unloader, dust cover, turret assembly. But does not include compensation frame) | |
14 | Air system | Air pressure:0.8~1.8 MPa Air consumption: 15m3/min | Selection principle: according to the impactor | |
15 | Drilling rate | ≥0.2m/min | Related to rock hardness and bore diameter | |
16 | Water pipe working pressure kg/cm2 | External water pressure about 2~3kgN, Pressurized by the booster pump. | ||
17 | Water consumption L/min | 10~12 | ||
18 | Optimum height of stope | 3.2m ~ 3.6m |
1. Spin head directly driven by low-speed and high-torque hydraulic motor is adopted. With more simple butreliable structure. The seal of the spin head effectively prevents high-pressure air and water from leaking intorerrarmotor cavity. Spin head can be easily maintained and has a longer service life. (TongGuan's patented technology).
2. The air and water system is integrally connected by motor and washing machine, with reliable performance and long service life.
3. Refuelling system by electronic impulse makes impactor more efficiently lubricated and have a longerservice life
4. This product has passed inspection which was held by State Production Safety Committee ChangSha Mining Mechanical and Electrical Equipment Inspection Center and obtained Mining Equipment Safety Mark"certificate which was issued by State Mining Products Safety Approval and Certification Center.
B. Drill Performance:
1. The guide rail adopts a V-shaped structure, makes the drilling accuracy improved and the deviation slope less than 1%.
2. With faster dilling speed that one minute can drill 0.2m-0.3m.
C. Drill Adaptation:
1. The rotary drill boom adopts gear rack, with large torque and reliable positioning. Provides all-round rock drilling.
2. Stable and reliable support mechanism to ensure drilling accuracy.
3. Stope height no lower than 3.2m, no higher than 3.6m, roadway width no narrow than 2.6m.
D. Drive Mode:
1. The electricity power, low cost, low energy consumption, low noise.
2. The four-wheel adopts Italian Bonfigli motor independent drive, makes the drill rig have strong walking ability and be able to spin in circles without moving. (Tongguan’s patented technology)
E. Control Performance:
1. Hydraulic rod unloading system alleviates labor intensityand and saves auxiliary operation time.
2. Drilling and positioning can be controlled on movable platform which can realize long-distance and multi-directional operation.