Growth Light AC LED Module High PPFD D5070 220V 50W COB LED Chip

D5070 Driverless led module 220V 50W COB LED Chip Full Spectrum Plant Growth Light Floodlight Outdoor Lamp High PPFD

TYF-D5070S5023R0.pdf

• Connected directly to AC voltage without driver;
• A module with integrated components;
• Economical one-piece solution;
• High efficiency, high power factor and low harmonic distortion;
• High color rendering index (≥70);
• High luminous efficacy 110LM/W;
• Three-year warranty;
• LEDs approved LM80
• Application: Flood light

1) product code: C=Client Module D=Self Module

2) Client Code & Module Code: if ①=C then 4 digit for client code else for self module code

3) IC Code: one character for IC

4) Power Code:

5) Voltage Code:11=110V,12=120V,22=220V,23=230V

6) CCT Code

Chromaticity Bins

TYF complies with the ANSI C78.377A standard for its chromaticity bin structure. For each ANSI quadrangle for the CCT range of 2700K to 6500K, TYF provides 5 Bins and 3 Bins.

Figure 4-1-1 Chromaticity Bin

Table 4-1-2 5 step Bins

Table 4--1-3 3step Bins

Typical Electrical & Optical Curves

Figure 4-2-1 Relative Power vs. Voltage, T_a =25℃

Figure 4-2-3 Radiant Pattern, T_a =25℃

Note:

1) Operating Voltage doesn't indicate the maximum voltage which customers use but means tolerable voltage according to each country’s voltage variation rate. It is recommended that the solder pad temperature should be below 85℃.

2) Color bins are defined at transient operation.

3) The tolerance of measurement at our tester is Φv+/-10% and Ra+/-2.

4) Tolerance of ±5% on Power dissipation.

5) Φv is the total luminous flux output measured with an integrated sphere.

6) Surge Capacity in accordance with IEC61000-4-5.

7) The Variants Modules Parameters please reference table2-2.

Notes:

1) All dimensions are in millimeters.(Tolerance:±0.2mm)

2)Scale: None

Note:

1)TYF Opto. DOB Module is Recommended to keep the junction temperature under maximum junction temperature spec.(Table 2-4).

LED lead temperature and IC top case temperature measured with thermocouple. LED and IC unction temperatures can be calculated using the formulas as follow.

Ts_max=Tj_max-Rθj-s * Pd

For Example:

If LED lead temperature and IC top case temperature are 90℃ then the LED junction temperature

Tj=Ts_max+Rθj-s*Pd=90℃ + 12 ℃/W* 1 W = 102 ℃

and the IC junction temperature

Tj=Ts_max+Rθj-s*Pd=90 ℃ + 15℃/W*2 W= 120 ℃

Silicone Resin of DOB (AC-COB) Handing

TYF Opto. LED modules products, packed in plastic Tray, according to different size, XX PCs each plastic Tray, as shown in the following. products without plastic box packed in bubble bags, in order to prevent the outside pressure, choose different bubble bag, according to the product size in each pack of XX products, packaged product will be stored in the form of carton and sealed, as shown in the following.

1) xx PCS LED module per Tray 4) Box information & packing

2) Tray stack and taping, XX LED module trays and additional 1 dummy trays each up of box. Add silica gel (1 each) on top of the tray

3) Sealing packing

Shenzhen TongYiFang (TYF) Optoelectronic Technology Co., Ltd., was established in Shenzhen, China in 2009 and located in jincheng Road, Shajing Town, Bao'an District, Shenzhen, is a National High-Tech Enterprise focuses on high-end LED device package, COB integrated technology development, optical design and LED lighting solutions. TYF Strives to bring in high-end machines for full-automatic production and aging test equipment for making itself a leading International LED production base.

Main products includes COB, Flip-chip COB, Tunable COB, EMC 3030, EMC5050, EMC3535, K2 High Power Emitter, Horticultural LEDs, AC LED Module and PCBA. TYF provides full-range of technical and professional support for LED light source design, solutions and lighting applications.

With the concept of “High Quality, No Defect:, TYF executes strict quality control according to the ISO/TS16949 certification system in every step from the raw materials to technological design and to the production. The full series of products was certificates by LM-80, and obtained certificates of CE, ROHS, EN62471, ISO9001:2008 and etcs. TYF successfully obtained the China National Qualifications Evaluation Committee (C N A S ) Laboratory accreditation certificate.

With 10 years of business development in LED package field, TYF has been adhering to the core values of“ Customer-oriented, Talent-oriented, Honesty-oriented” the company gets the support and the praise from our clients. TYF strives to become a world famous brand of high-power LED light source.

With the spirit of “Integrity, Innovation, Quality and Efficiency”, TYF tries to become a pacemaker and a positive advocate in the field of LED. While providing first-class LED lighting products, TYF concerns more on customer's interests and global environmental issues. TYF will keep trying and devoting itself to the cause of human optoelectronics and of environmental protection.

TYF owns more than 100 patents, TYF is Shenzhen high-tech enterprise and China high-tech enterprise.