Toddler Outdoor Playground Sets Outdoor Plastic Playset With Slide For Adventure

All plastic with pretty colors outdoor playground with diminutive size for adventure TQ-QS005

The Spring Festival is coming, all the major attractions will usher in a wave of tourist peaks. The rides will also start to run at high load. Many parents will bring their children to the playground to play. At this time, the playground safety issue has become The most important thing. We remind you that while your child is having fun, pay special attention to safety. We will summarize the four safety rules that must be known for your playground, so that you can play safely and enjoy yourself.
1. How to choose safe play equipment?
We remind you that when choosing a ride, check the equipment and facilities that the child is playing. Is there a safety inspection certificate issued by a special agency? Parents should pay attention not to let the children play the special old, the wires are exposed, and the operation is abnormal. There are rides that do not shake properly. For example, when playing a swing, pay attention to the material of the swing. The swing should be made of softer materials such as rubber or plastic instead of wood and metal. The playground's climbing frames come in a variety of shapes and sizes, including rock climbing, arch climbing frames, vertical and horizontal climbing poles, which are more challenging for children than other equipment. The climbing frame is also a public playground injury accident. High incidence area. The upper limb strength of children under 5 years old is still relatively weak, and should only climb those relatively small climbing frames. Children from 5 to 7 years old are only suitable for climbing frames below 1.6 meters in height. Children over 7 years old can only climb climbing frames below 2.3 meters.
We have learned that some playgrounds usually arrange service personnel to better care for the safety of children. Before the child enters the play area, the service staff's work attitude can be observed first. Only the service personnel can take the responsible work attitude, so that the child can go to the game more confidently. In addition, before the children play, parents should pay attention to the tourists who want to see the rides, choose the rides suitable for the children to play, and when playing the rides that need to wear safety devices, help the children to fasten their seat belts and wear safety helmets. And other security devices. In the process of playing, parents should lead by example, obey the command of the staff, and pay attention to safety.
2. How to choose the right ride according to the age?
We have learned that the safety belts and safety bars of the amusement facilities in the amusement park are all set according to the height. Some strongly stimulating items have children’s age and physical requirements. Parents take the baby to the playground to play safely. For the ride, don't let the baby play the rides that are not suitable for his age, height and physique.
Parents must be familiar with the characteristics of their children. When they play with a group of children, will they often feel unsafe due to excitement, and whether his ability is sufficient for certain facilities. It is recommended to let the baby play for 10 minutes first. The parent will watch it next. If he finds that he is not suitable for the game inside, don't take him away from the playground immediately. Let him play for a few more minutes, then use other things to attract his attention. Let him take the initiative to end the current game.
We have learned that some playground projects are potentially dangerous for children of unsuitable age. For example, some stimulating and high-speed facilities may cause accidents in children with smaller bodies to fall; the trampoline is a lot of children. I like to play the rides, but in the game, children who are young and inflexible have the danger of being trampled by children; slower rides like small trains seem safe, but they may also be given to children because of their children’s Injured, there have been cases where children climbed up and down and were injured by wheels. Even if the equipment in the game area is safe after preliminary inspection, you should not let the children play. When a group of children are having fun, it is easy to fall and fall because of pushing. Therefore, it is important to let the child move in the line of sight, and in the event of an unexpected situation, he can handle it himself and minimize the damage. Don't let your child stand up or untie the seat belt.
3, be prepared to play in advance
We remind you that when you take your child to the playground, you should wear a light fit and easy-to-sport clothing for your child to avoid accidents caused by falling clothes. Don't dress your child too complicated, which will increase the risk index, such as clothes with hats, or long skirts, large swing skirts, and gauze, so as not to be trampled, stumbled, and fell by children. Clothes are also easily smashed and fall. Also, do not wear clothes with a string or belt tether. Strings, backpacks, and necklaces may inadvertently hang on the device, causing danger, or even accidental around the neck, causing suffocation. In addition, the sneakers with laces are not suitable for preschool baby wear. On the one hand, the baby is too young to complete the work of tying the laces. Such sneakers are very inconvenient to wear and wear. It is not strong enough to loosen when running or climbing. It is easy to trip the child or hook up the sports equipment, causing the baby to be in danger.
4, with the child "about three chapters"
We remind you that it is also necessary to carry out safety education for children when playing games. The babies must know how to ensure their safety and follow these safety rules to avoid injury.
Parents should enter the playground with the baby "three chapters of the law" to let the children know how to play the safest. For example, when playing, you can't push or hit people. When you slide, you should wait for the previous child to leave the slide before you can go down. . Once the child has a dangerous move, stop the game immediately. Don't let your child try dangerous actions, such as jumping from a height, rolling down, or rolling back and forth, without ensuring safety. Children should tell their children when they play on the swings. Always hold the ropes of the swings with both hands. When not playing, wait until the swings are completely stopped. When passing by the swing, be sure to walk around to prevent being hit by the swing. Also let the children remove bicycles, backpacks and other items from around the equipment to avoid tripping over them when playing. If the equipment in the playground is wet, tell your child not to play because the wet surface will make these instruments very slippery.

Wenzhou Kidsplayplay Toy Co., Ltd. (www.tqplayground.com) is located in Linhai, Taizhou, an excellent tourist city in China. The company covers an area of ​​more than 20,000 square meters. It started from a mold company ten years ago and developed into more than 100 employees. Name, including a group of high-quality technology and management talents with years of experience in rotomolding molds, is a rotomolding mold and children's play equipment company integrating design, development, production and sales.

In May 2011, the company cooperated deeply with Zhejiang Yingbo Amusement Equipment Co., Ltd., and merged with Zhejiang Tianqi Rotational Mould Co., Ltd. in March 2017, unified management, unified management, and achieved substantial breakthroughs in the indoor naughty castle field. Amusement equipment that meets the German EN1176 standard is dedicated to children around the world. Adhering to the goal of “going to the world and rolling the world”, the company is committed to expanding overseas markets. The company's English website www.tanqplay.com, March 2012, with the company's continuous improvement in the Southeast Asian market, Tianqi Amusement Thailand branch TQ (Thailand) Co., Ltd (website: th.kaidiplay.com) and Malaysia Company TANQ EQUIPMENT SDN BHD (website: www.my.kaidiplay.com), and Mexico branch TQ PLAYGOUND CO., LTD. (website: www.tqplay.com), Russian branch Kidsplay Toy Co.. (website: www .ru.kaidiplay.com) has been established one after another, opening a new page on the road to the world and rolling the world.

Management policy: The company adheres to the concept of 'all for the safety of children, all for the health of children, all for the development of children' concept. We have consistently provided our customers with products with high safety performance, strong entertainment interest, strong structural design reliability, elegant appearance and international standards. Establish a customer-centric service concept to protect the interests of customers from the root and the source.

Main products: rotomolding molds, outdoor large-scale amusement equipment, indoor naughty castles, outdoor combination slides and plastic accessories. Suitable for large shopping malls, supermarkets, communities, kindergartens, parks and other play areas. The company has its own design team, which can develop molds according to customer requirements or design products according to the actual site of customers, and produce products of different specifications to meet customer needs.

Product features: more than ten years of rotational molding mold industry experience and independent research and development of large plastic rotary molding equipment, with 7 independent arm, four-station full-scale rotary forming rotomolding machine, in the structure to ensure that rotomolding products are not easy to fall off, no damage In the surface treatment, the pores and trachoma are eliminated, and the wall thickness of the product is uniform and reliable. The plastic is made of South Korean imported LLDPE plastic powder, which is in line with the international environmentally friendly edible grade. The iron parts are made of hot-dip galvanized pipe and spray-coated. The complete set of products is more resistant to use than traditional FRP and blow molded products. It has a longer service life in outdoor high and low temperature and various complicated environments, and is resistant to abrasion and weathering and is not easy to fade.

In addition, the design team is a strong guarantee for the development of our company. In the design of molds and accessories, we strictly follow the EN1176 standard and ensure the safety of the products from the source. The design of the complete set of products is based on the outstanding overall effect, and the reasonable and safe frame structure wins the praise of the customers.

Tianqi Rotomolding follows the tenet of “all responsible for customers”, continuously improves the quality of its personnel and product advantages, continuously improves and builds lean products, and passes third-party certifications such as CE, ISO, TUV GS EN1176, SGS factory certification, and better. Serve the customers and create a bright future for the company's strategic goal of “going to the world and rolling the world”.