AA1XXX Aluminium sheet for dial plates and ornaments Application
Brand Name:GBS
Certification:ISO
Model Number:GBS-MQB
Minimum Order Quantity:6mts
Delivery Time:4-8 weeks day
Payment Terms:D/A, L/C, D/P, T/T
Contact Now
Add to Cart
Active Member
Location:
Nanning Guangxi China
Address:
No.915,dajiahui.huijincheng,nanning, nanning city,china
Supplier`s last login times:
within 35 hours
Product Details
Company Profile
Product Details
Aluminium sheet for dial plates and ornaments
1. Application: applies to watches, instrument dial, signage and various decorative high-quality pure aluminum sheet material.
2. Alloy, temper, size
Alloy | temper | Size mm | ||
thinkness | width | length | ||
1070A,1060 1050A 1035 1200,1100 | O,H14 H24,H18 | 0.3 - 4.0 | 1000 1200 1500 | 2000-2500 3000-3500 4000-4500 |
note 1 0.3-0.4 mm thinkness suitable for width of 1000 mm, and length of 2000 mm 2special width or length if needed, both sides could agreed in order | ||||
3. Mechnical properties
Alloy | Temper | Thinkness mm | UTS, MPa | ELOGATION PCT (50 mm) | ||||
1070A 1060 | 0 | 0-3-0. 5 0.5 - 0. 8 0. 8 -1. 3 1.3 -4.0 | 55 -95 | 20 25 30 35 | ||||
H14 H24 | 0.3-0.5 0.5-0.8 0. 8-1-3 1. 3-4.0 | 85 -120 | 2 3 4 5 | |||||
H18 | 0.3-0.5 0.5-0.8 0-8-1-3 1.3-2.0 | 120 | 1 2 3 4 | |||||
1050A | 0 | 0. 3-0. 5 0,5-0. 8 0. 8-1. 3 1.3-4. 0 | 60 -100 | 15 20 25 30 | ||||
HI4 H24 | 0. --0-5 0. 5-0- 8 0.8-1. 3 1.3-4-0 | 95 -125 | 2 3 4 5 | |||||
H18 | 0. 3-0.5 0. 5-0. 8 0. 8-1.3 1.3 -2.0 | 25 | 1 2 3 4 | |||||
1035 1100 1200 | 0 | 0..3-0.5 0.5 -0.8 0. 8-L 3 1- 3-4. 0 | 75 -110 | 15 20 25 30 | ||||
H14 H24 | 0. 3-0.5 0.5 -0.8 0.8-1. 3 1-3 - 4.0 | 120-145 | 2 3 4 5 | |||||
H18 | 0.3 -0.5 0.5-0. 8 0. 8-1-3 1.3-2. | 155 | 1 2 3 4 | |||||
4. Tolerance(thinkness) mm
thinkness | allowance(plus and minus) |
0.3 -0.6 0. 6-1. 2 1.2-2.0 , 2.0--4.0 | 0. 05 0. 06 0.10 0. 15 |
5. Width /length tolerance mm
| Width tolerance | Length tolerance |
| 3 plus and minus | 4 plus and minus |
6, Flatness mm
| width | thinkness | Less than | |
| End of sheet | Other part of sheet | ||
| 1 000-1 500 | 0.3 - 1.5 | 13 | 7 |
| 1.5-4.0 | 15 | ||
| Note:end means the surface within 300mm from end along the direction of length | |||
7. surface quality
Plate shall be rolled surface and of uniform quality.
The surface of the plate does not allow cracks, corrosion, pine
dendritic patterns, etc. to affect the use of defects.
Slight oil marks are allowed on the surface of the sheet, but the
oil Mark area should not exceed 10 % of the surface
On either side of the sheet, there shall be no more than four other
unspecified defects per two square metres. Each area shall not
exceed 50mm x 50mm, where the depth of the defect shall not exceed
half of the thickness allowed to pass, and the other side of the
sheet shall allow other unspecified faults to exist, and the depth
shall not exceed the thickness allowed to pass
AA1XXX Aluminium sheet for dial plates and ornaments Application
Inquiry Cart
0