Custom Design FRP Truck Body Fiberglass Truck Dashboard Smooth Surface ISO9001

frp truck body parts/fiberglass truck dashboard/fiberglass truck fender/custom front fender

Fiberglass FRP truck forklift parts, agriculture construction machinery body parts cover

Today we are a major supplier to Offering the gamut of materials and processes, we can support specific requirements for appearance, aerodynamics, durability and weight. Our involvement in other demanding industries augments the value we bring to truck OEM’s with material breakthroughs such as advanced fiber reinforcement and alternate resin technologies that help reduce weight. Our R&D research and testing laboratory is approved for composite processes and materials by leading OEM’s.

As a longstanding partner to commercial vehicle manufacturers, Lanmon is resourced to meet your needs in the areas of quality assurance, JIT delivery and project management. Our Design Center works closely with customers to achieve product designs that are fully optimized for manufacturability. Rigorous program management during design, tool building, initial part approval and production launch ensures complete synchronization with your delivery needs.

In addition to basic molded panels, we provide installation of interiors including cable and wiring, insulation, cabinets, lighting and trim panels. We also offer in-line sequencing – ready-to-paint assemblies delivered to your plant right on time.

Value Added Services
·In-mold coating, weight reduction, packaging design support, part consolidation, material innovation, prototyping, professional project management
·Plants locatedChina enable JIT delivery and low transportation cost
Quality and Other Certifications
·ISO-9001, ISO/TS-16949 and ISO 14001
Exterior Panels
·Hood assemblies, Fenders - full, half and quarter, Cowl panels, Roofs – mid, raised, Trim tabs and fairings, Sun visor assemblies, Structural door surrounds, Exterior trim - rocker panels, A-pillars, Air deflectors
Under Hood Panels
·Fan shrouds, Windshield wiper housings (rain trays), Cooling modules, Battery boxes/covers, Engine covers, interior/exterior, Firewalls
Interior Panels
·Under ride protectors (under cab/chassis fairings), Door surrounds, Load floors, Trim panels

Applications:
Every FRP bus parts


Specifications:
Key Specifications/Special Features:
1st:Mould treatment:
Polish: Mould must be polished before production which will guarantee the good and solidified surface
Clean: Special detergent are used to get the dust away from the mould which will make no dark markings in the
gel coat surface.
Release agent: This will be brushed on the mould to make ejection easily.

2nd Fiberglass and resin:
Gel coat: The color of products is decided by the gel coat,with thickness of about 0.3-0.5mm. UV resistant can
be added.
Surface mat: This is to avoid the air bubble on the surface, and also make fiberglass mat invisible from the finished
surface.
Fiberglass mat: Normally we use 300g/m2 (0.6mm thickness) and 450g/m2 (0.9mm thickness). According to your
requests on the thickness and strength, we will calculate how many layers of fiberglass mat should be used.


3rd
Solidify: The time required for solidifying depends on thickness and weather condition.Normally 24 hours for one
piece to solidify to avoid any deformation after demoulding.
Demould: After solidified, the product will be demoulded
Cut and trim: We will mark the trim line and hole positions on the mould,then trim according to the marks to
gaurantee the mounting dimensions



4th Adhesion: Professional mould and Temperature and worker

5th Surface treatment :

6th Painting

7th Package Solution:
Our principle: Safe and economical
We choose economical packaging on condition that there will be no damage during transportation.Shipping: We are very glad to get the freight cost information for you
as we have long term cooperated forwarder company.





Tag Words:
The FRP products have the following advantages:
Corrosion resistance, good impact toughness, high strength, low mold cost, easy operation, short development cycle, etc. At the same time, it can achieve any complex form of high quality surface, which is very suitable for the manufacture of bus body and interior. Including new product development.

FRP is widely used in large internal and external coverings, such as: canopy, front and rear, luggage compartment door, bumper, instrument panel, air duct, interior trim and so on. The adoption of FRP increases the corrosion resistance, sound insulation and heat insulation of the vehicle body, and enables the passenger car to be lighter in weight, which can save a lot of energy.

Qingdao Lanmon Industrial Co., Ltd., production and export of glass fiber reinforced plastic products more than 10 years of experience, mature hand-paste molding process, the quality of our products have been well controlled, has won the trust of customers at home and abroad and favor. Products are high-speed rail car interior; automotive shell; construction machinery and medical machinery shell; FRP crafts molds; FRP furniture.

Company's existing staff of 60, of whom five were senior technicians, process technicians and 10. Strict control of the quality of the products, passed the strict ISO9001 quality system certification.

·

Mission: Extensive use of composite materials technology to open up a new area on the material applications