Lightning Protection Steel Screen Panels , Heat Preservation Decorative Steel Sheets

Stainless Steel Decorative Panel Custom Color For Construction Building

Stainless steel metal decorative board installation precautions

(1) Before installation, the iron parts or steel frame, column, lightning protection, heat preservation and rust prevention shall be inspected once. After passing the test, the corresponding specifications of the surface materials shall be put into position and then installed from top to bottom.
(2) The flatness of the adjacent glass surface of the line and the horizontal and vertical degree of the seam of the board during the installation process, and the width of the slit is controlled by the wood board module.
(3) When installing, it should be in place, temporarily fixed, and then pull the wire to adjust.
(4) During the paddle process, if there is an error in the slit width, it should be distributed in each glue joint to prevent the error from accumulating in a certain seam or a piece of face material.
The metal decorative sheet wall decoration is suitable for the wall surface of the public building, commercial building, factory building, garage and other projects with waterproof rating of 1~3.

Stainless steel metal decorative board monitoring points

1. The intersection of the wall of the gold decorative panel and the vertical wall and the protruding wall structure shall be treated with flooding.
2. The long seals should be prevented between the two plates; after the screw is tightened, the joints of the two plates should be sealed with sealing materials.
3. The pressing plate should be tightened with galvanized bolts with waterproof gaskets, and the fixing should be set on the wave crest. All exposed bolts (screws) shall be protected by a sealing material.
4. When laying the wall surface of the profiled steel plate, all the lap joints should be sealed with sealing material to prevent leakage.
5. In order to ensure the stability and firmness of the profiled steel plate and the fixed bracket, the installation of the profiled steel plate should be fixed by bolting or pulling the rivet. The profiled steel plate and the fixing bracket are bolted.
6, gutter, gully, cornice and gable detail node processing. When the gutter is made of galvanized steel, it should be inserted under the profiled steel plate, the length of which should not be less than 100mm; the profiled steel plate at the trench should be inserted into the trench, its length should not be less than 50mm; the profiled galvanized steel plate should be applied to the mouth The plug is sealed and the ditch is sealed; the gable of the gable galvanized steel plate and the fixed bracket are sealed.
7. The height of the wall of the profiled steel plate and the wall of the protruding wall shall not be less than 300mm, and the installation shall be straight.
8. The mouth line and flooding section of the metal decorative board wall should be straight and without undulation, and the wall surface should be neat and beautiful.

Stainless steel metal decorative panel

• Stainless steel metal decorative plates are made of aluminum, copper, stainless steel, aluminum alloy, etc. The choice of copper and stainless steel decorative plates is higher in grade and higher in price. The general room decoration is suitable for aluminum alloy decorative panels. Shopping psychology, good quality and cheap. The specifications are rectangular, square, etc. The maximum size of the rectangular plate is 6000mm*100mm*0.5mm, and the width of the general room is about 5m. For the decoration of the larger room, the overallity of the long strip is strong; the decoration of the small room Generally, 300mm*300mm can be used. Due to the poor thermal insulation performance of the metal plate, in order to obtain a certain attraction and heat insulation function, when the metal plate is selected for the ceiling decoration, the heat-absorbing and sound-absorbing products such as glass wool and rock wool can be utilized to achieve the function of heat insulation and sound absorption. In particular, residents living on the top floor can improve the indoor environment after decoration, and obviously save energy consumption costs of air conditioning.
• The metal decorative panel is also a metal decorative panel. The meaning of the metal decorative panel refers to a novel interior decoration material which is composited with metal as the surface material, and is installed by inserting or structurally connecting the metal plate and the block decoration material. The decorative layer formed by the process and the surface of the wall. The decorative level can directly reflect the decorative effect of the building, making full use of natural or man-made materials to express the designer's decorative design style, which can better cover and protect the wall surface.
• Metal decorative panels are mainly used in architectural decoration and decoration, which not only can decorate the outer surface of the building, but also protect the surface from erosion by rain and snow. Especially for some new wall materials, such as light steel keel gypsum board wall, paper grass wall and so on.

Stainless steel metal decorative panel board quality requirements

1. There are many types of metal decorative plates, such as pressed steel plates, zinc plates, aluminum-zinc plates, aluminum alloy plates, aluminum-magnesium alloy plates, copper plates, stainless steel plates, and colored stainless steel plates. The shape of the board is varied, and some composite boards are to be thermally insulated between two metal sheets, and some are single boards. Some boards have a life span of more than 50 years.
2. The thickness of the metal decorative board. Generally 0.4~1.5mm, the surface of the board should generally be painted.
3. The quality of all kinds of metal plates and auxiliary materials used in wall engineering must meet the quality standards stipulated by the design.
4. Specifications and performance of metal profiled sandwich panels and quality requirements for connectors and sealing materials.
5. Quality, storage, transportation and storage of metal decorative panel pressed sandwich panels
1) Metal decorative plate pressed sandwich panels should be neatly edged, smooth in surface, uniform in color, regular in appearance, and free of defects such as demoulding and rust.
2) Metal decorative plate type sandwich panel stacking place should be selected near the installation site, the stacking site should be flat and solid, and it is easy to remove the ground rainwater, should be stacked in layers, and should be placed every 3~5m.

Some of our projects

Our Shenzhen production base is about 8000 square meters, Dongguan Industrial Park is about 50,000 square meters, and there are 50 advanced stainless steel material processing equipments such as CNC machining centers, laser cutting machines, CNC routers, etc.

There are about 280 employees (factory production staff 200 people). 80 project construction staff, among which there are 50 senior technicians with rich working experience.

The company is mainly engaged in the finishing of stainless steel plates, stainless steel honeycomb plates, anodized aluminum plates, copper plates and other metal plates in the architectural decoration industry.

The annual output of stainless steel is 256,000 square meters, and the finished product rate reaches 85%. The project's performance has spread all over the country.

In addition, it has also participated in the construction of many large-scale projects in the Middle East,Europe and Americas