Safe Burglarproof Stainless Steel Roller Shutter Flexible With Anti Pushing Device

Custom Stainless Steel Rolling Shutter Gate Door For Commercial Buildings

Stainless Steel Roller Shutter Door Gate Features

• Anti-pushing device prevents the door from being shaken by force means and is safe and burglarproof.
• (Optional) The humanized design of the automatic rebound of the obstacle prevents the collision of the vehicle object when the door body falls, so that the person or the vehicle passes smoothly. The door is sturdy and can be equipped with (optional automatic alarm device) and anti-pushing device to prevent the door from being forced by force, continuous alarm and security.
• According to the different characteristics of the building, you can choose three different installation methods: interior, exterior and middle. After opening, the roller blind is wound up in the upper part of the door, saving the interior space of the garage and not mixing dirt, rain and snow. Brought into the garage, the appearance is beautiful and stylish.
• The door body is novel and beautiful, flexible, compact, and can be widely used in the inner and outer doors of buildings.
• The door body is driven by electric power, which is light and flexible. The upper and lower strokes are automatically controlled by the limit switch, which is convenient to operate, safe and reliable. It can be operated manually during power failure.
• There are many types of door bodies, among which the fully enclosed door body has good sealing performance, and can be windproof, dustproof, heat preservation and corrosion resistant. The door body can also be fireproofed after special treatment.
• The rolling door machine has advanced structure, complete functions and overheat protection device, which can protect the motor from damage during overload and high temperature.
• A remote control can be installed to enable the electric shutter to be opened and closed remotely.
• The electric shutter gate profile is the main part of the electric shutter gate door and window, and its performance determines the performance of the entire door and window. The composite electric shutter gate adopts high-quality aluminum alloy (steel) double-layer rolling forming, and the exterior is treated with multi-layer baking varnish. The middle is filled with poly-alkali insulation foaming material without fluorocarbon, and the precision production process is adopted. The electric rolling shutter door produced by the manufacturing technology has beautiful appearance, soft color and horizontal embossed design, which reflects the layered beauty. The winding diameter is small, sturdy and durable, suitable for new and old buildings.
• The newly launched milky white curtain series is elegant in style and creates a strong decorative atmosphere. Other colors can be customized according to customer requirements (light gray, brown, bronze, cream, sand and sand, etc.) According to the scope of the scope of science, the application range is very wide, and it is one of the most popular architectural decorations in the world.

A. Intelligent infrared anti-climbing device: When a person climbs the door, the system will immediately alarm, thus ensuring the safety inside the door.
B. Special profiles: Adding different geometric shapes and bones to high-hardness zinc-aluminum alloy profiles can greatly enhance its strength. The surface is treated by special electrophoresis, the gloss is infinite, it is not easy to stick dust, it is not corroded by polluted gas, and it will never rust. The new period is long. C. Engineering plastics: The main plastic parts of the door body (such as the connection between pipe and pipe, plastic parts, movable parts of the door, etc.) are made of high-quality engineering plastics (such as PC, PA), high toughness, impact resistance, and resistance to distortion. Wear-resistant, freeze-resistant, light-resistant, not easy to aging, long service life, free from wind, snow, lightning, sun and rain.
D. Intelligent infrared probe anti-collision device: 30-50cm of people or foreign objects can be automatically returned to the door during the closing process, thus ensuring the safety of vehicles and pedestrians. Standard structure: the inner space of the door row (that is, the distance between the two main bends adjacent to each other, excluding the main tube size) adopts the standard size of the shutter gate 320mm (refer to foreign technology) to ensure the cross tube is the most solid and greatly reduces the running noise.
E. Unique process The main frame profile of the door body is made of plastic parts. The screw fixing of the connection position adopts the invisible design to improve the appearance of the door body. The connection between the profile and the plastic parts adopts the processes of punching, pressing and drilling. The structure of the door is firm and there is no solder joint. The latest cross-connect design: the cross tube is made of special technology and is equipped with a super PA wear sleeve. The tight combination with the round tube not only makes the door row structure firmer, but also ensures smoother operation.
F. The characteristics of electric shutters beautify the environment, improve the appearance of the company, enhance the corporate image; help to create a civilized enterprise, civilized factory, civilized city atmosphere; improve safety, even if there is damage or overturn in the middle of the night, immediately call the police. Dongguan electric shutters are mainly used in living quarters, government schools, enterprises and institutions. The electric shutter is connected in series with the multi-joint movable door. In the fixed slide, the upper and lower doors are rotated around the reel above the door. Applicable to public places or houses such as commercial facades, garages, shopping malls, hospitals, factories and mines. Especially the door opening is large, and it is inconvenient to install the ground door body.

Stainless Steel Roller Gate Maintenance

• The upper end of the installation position of the rolling gate should have reliable fireproofing facilities. The detachable movable cover must be set at the lower end of the reel of the rolling gate. 500×500mm must be reserved at the lower end of the rolling gate. Remove the hole for easy maintenance.
• If there is a large jitter or abnormal sound during the operation of the rolling gate, stop the inspection and remove the debris that hinders the normal opening and closing of the curtain.
• Roller door curtains and rust-prone parts should be regularly treated with anti-corrosion, paint and maintenance. It is forbidden to impact the facade with heavy objects and hard objects.
• The upper limit position of the bottom of the rolling gate must be kept at a distance greater than 200mm from the lower end of the bearing frame to ensure that the topping phenomenon does not occur when the brake is stopped.
• During the process of opening and closing, the rolling gate should have the function of stopping with the position, and should not stop and continue to slide down. If the sliding distance is greater than 50mm, the rolling gate control appliance and the roller door brake should be immediately applied. Carry out careful inspection and repair, and run normally.
• The rolling door machine in the operation, taxiing, transmission and other parts should be regularly checked (at least 3 times a year), and timely refueling as needed to ensure the normal use of the rolling gate.
• When the shutter is operated, the operator must stand at a position where the operating state of the rolling door can be seen, otherwise it is prone to accident and damage.
• All electric-controlled rolling shutters must be opened and closed in the same direction as the switch box. Especially when the new power-on test or external input power conversion phase line should be used, the manual device should be used to place the curtain at the door height 1. 2 position, after the power is turned on, try to open and close the roll door until it is attached to the instruction, otherwise it can be used normally, otherwise the limiter will be damaged, causing damage caused by rolling shutters or topping.
• Roller shutters and roller shutters are prohibited from coming into contact with acid and alkaline solutions to prevent corrosion of the curtain surface.

Custom Stainless Steel Rolling Shutter Door Gate For Buildings

• Rolling gates, also known as "rolling shutters", are connected in series with a number of articulated flaps. In a fixed chute, the upper and lower doors are rotated around the reel above the door. The rolling shutter is suitable for public places or houses such as commercial facades, garages, shopping malls, hospitals, factories and mines.
• The gate is suitable for public places or houses such as commercial facades, garages, shopping malls, hospitals, factories and mines.
• In particular, the door opening is large, and it is convenient and quick to open the place where the ground door body is inconvenient. Such as for garage doors, shopping malls, fire shutters, hangar doors.
• There are two common control methods for rolling shutters:

1, wireless remote control, common 433MHz wireless remote control handle control;
2, external system control, with the development of information technology, this method is also increasingly used, such as electric door automatic release system through embedded control system or computer control, the computer automatically recognizes the vehicle number plate, automatically open the door

Stainless Steel Rolling Shutter Door Gate Classification

• Manual

The manual pull-up switch is achieved by balancing the force with the torsion spring on the central axis of the roller blind.

• Electric

The special motor is used to drive the central axis of the roller blind to rotate, and the roller shutter switch is reached, and automatically stops when it is turned to the upper and lower limits set by the motor.
Special motors for rolling gates include: external roller shuttering machine, Australian roller door machine, tubular roller door machine, fire roller door machine, inorganic double curtain roller door machine, fast rolling door machine, etc.

• Grid

Even if the grid shutter is closed, it will not give people the feeling of being stuffed into the box, and it will still be ventilated. And it can be used with aluminum alloy shutters to achieve ventilation and prevent peeping

• Crystal

The crystal shutter is made of imported top-quality non-breaking bulletproof and anti-theft film. It has the effects of transparency, anti-theft, rain, dust and sound insulation. It is widely used in banks, shopping malls, shops, telecommunications, subway stations and other places to pursue a safe and stylish style. The ideal choice.

• Stainless steel

It has beautiful color, smooth and horizontal embossed design, and has a layered three-dimensional sense; the door surface is treated with baking paint to make the door panel more durable; a variety of installation methods are available for selection, installation is simple, construction speed is fast, and the construction period is saved. , can save costs by single curtain replacement.
Stainless steel roller shutters: stainless steel tube shutter, stainless steel roller shutter, stainless steel chess shutter, stainless steel closed shutter. The stainless steel shutter is mainly made of 304# 201# stainless steel, and the stainless steel is made into different profiles: stainless steel tube, stainless steel sheet and so on. According to different needs, it is processed into different profiles of stainless steel rolling shutters: it is widely used in banks, high-end shopping malls, stations, schools and other places. Stainless steel tube rolling gates are mainly assembled from high quality stainless steel tubes, stainless steel hanging pieces and guide rails. The appearance is practical and generous, and the service life is long. The stainless steel tube shutter has a good perspective effect and ventilation effect, and can also play a very strong isolation and anti-theft effect. It is favored by many modern merchants and door and window users, and has become a beautiful landscape of the modern city. Stainless steel sheet rolling gate is also called stainless steel through the door, mainly made of excellent 304# stainless steel sheet, stainless steel tube, guide rail and stainless hanging piece! Comprehensive features: It has a good perspective and aesthetics.

Our Shenzhen production base is about 8000 square meters, Dongguan Industrial Park is about 50,000 square meters, and there are 50 advanced stainless steel material processing equipments such as CNC machining centers, laser cutting machines, CNC routers, etc.

There are about 280 employees (factory production staff 200 people). 80 project construction staff, among which there are 50 senior technicians with rich working experience.

The company is mainly engaged in the finishing of stainless steel plates, stainless steel honeycomb plates, anodized aluminum plates, copper plates and other metal plates in the architectural decoration industry.

The annual output of stainless steel is 256,000 square meters, and the finished product rate reaches 85%. The project's performance has spread all over the country.

In addition, it has also participated in the construction of many large-scale projects in the Middle East,Europe and Americas