Add to Cart
Mineral Construction Wireline Drilling Core Barrel Fast Speed High
Efficiency
Wire-line core drilling equipment is very commonly used for mineral exploration for deep holes because of practical usage:pulling, stacking and lowering drill rods each time the core barrel is full.
They do not need couple and uncouple the rod string each time the
core is retrieved so wire line core barrels are used for deep
holes. An overshot assembly is dropped on a cable and directly
connect to the inner tube assembly, allowing fast retrieval of the
core after each operation
Wire line core barrels are higher penetration,higher core recovery
ratio.Longer bit life and lower labor intensity,and the advantages
get more clear with the increasing of hole depth.
The head assembly has latching and pivoting spear point mechanisms
which allow insertion and retrieval of the inner tube assembly, a
bearing assembly to allow the inner tube to remain stationary and
avoid sample damage while drilling, fluid pressure operating
indications and fluid control valves.
Now we proviede four types of overshot assembly: BQ, NQ, HQ and PQ,this is the retrieval device lowered on the wireline to recover the
inner tube assembly containing core.
Wireline double core barrel consists of:
1. Head Assembly
2. Inner Tube: 1.5m or 3.0m
3. Stop Ring
4. Core Lifter
5. Core Lifter Case
6. Locking Coupling
7. Adapter Coupling
8. Landing Ring
9. Outer Tube: 1.5m or 3.0m
10. Inner Tube Stabilizer
11. Thread Protector
Q Series Wireline Double Tube Core Barrels | |||
Size | Hole(mm) | Core(mm) | Head Thread |
BQ | 59.3 | 36.2 | BQ rod box |
NQ | 75.2 | 47.6 | NQ rod box |
HQ | 95.6 | 63.5 | HQ rod box |
PQ | 122 | 85 | PQ rod box |
Q Series Wireline Triple Tube Core Barrels | |||
Size | Hole(mm) | Core(mm) | Head Thread |
NQ3 | 75.2 | 45 | NQ rod box |
HQ3 | 95.6 | 61 | HQ rod box |
PQ3 | 122 | 83 | PQ rod box |
It has some advantages such as high penetration rate, high core
recovery ratio, long bit life and lower labor intensity.The
advantages can get more clear with the increasing of drill hole
depth.
Wire-line core drilling equipment is very commonly used for mineral
exploration for deep holes.