Multi Functional Full - Hydraulic Drilling Machine With 7m Feeding Stroke
Brand Name:KonDaSin
Certification:ISO9001
Model Number:YDL-300DT
Minimum Order Quantity:1 set
Delivery Time:15 days
Place of Origin:Jiangsu,China
Contact Now
Add to Cart
Active Member
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
Multifunctional Full Hydraulic Rig Anchor Drilling Machine 7m Feeding Stroke
1. YDL-300DT Hydraulic drilling rig with the feeding stoke of mast
is 7m,this water well machine is used to deep water well hole
project and seize the new market .It’s a
new,efficient,energy-saving and multifunctional full hydraulic
drilling rig.
2. The machine can use two 3m drill rods one time because of the 7m
feeding stroke,it can reduce the time of adding drill rod,also can
reduce the labour intensity.
3. It can pull casing pipe when drilling with casing and it is also
suitable for small non-excavation construction because of two large
cylinders on the mast and the lifting capacity can reach 25T.
The equipment,the drilling techniques way of the following:
a. Dry auger drill
b. Down-The-Hole hammer drill
c. Mud forward circle drill
d. Medium reverse circle drill
e. ODEX tools (casing pipe following) drill with DTH hammer
| Hole diameter | Φ150—Φ400mm | |
| Hole depth | 300-400 m | |
| Apply Rock hardness | ｆ=6—20 | |
| Air compressor pressure | 1.2—4MPa | |
| Air compressor flow | 16—50m3/min | |
Rotary speed | 0～25r/min,4,9,12,14,19,24, 25,28,38,48,50,63,76,101,127r/min | 0～39r/min,6,14,18,22,30,37,39,44,59,75,78,99, 119,159,200r/min |
| Torque N.M | 13900Nm(17MPa) | 10000Nm(17MPa) |
| Max Pull up capacity | 25T | |
| Pull up speed | 0-3m/min；3,3.74,7.54,15.08,18.1,21.84m/min | |
| Feeding capacity | 12.8T | |
| Feeding speed | 0-5.9m/min；5.9,7.34,14.78,29.57,42.83m/min | |
| Feeding cyliner stroke | 3500mm | |
| Max rotary head stroke | 7000mm | |
| Mast sliding stroke | 1500mm | |
| Mast working angle | -5～90° | |
| Min height to the ground | 360mm | |
| Winch pull up capacity | 1.5T | |
| Winch pull up speed | 20m/min | |
| Winch wireline dia | ф10mm | |
| Winch wireline length | 50m | |
| Platform turning method | Manul (pin) | |
| Crawler move speed | 1.5ｋm/h | |
| Climb ability | 25° | |
| Electric Motor | 55+18.5KW | |
| Diesel Type | 120kw,1500r/min | |
| Overall(L×W×H) mm | 7200×2100×2750(transportation) | |
| Weight | 10500kg | |
● The drill rig adopt telescoping mast.Stroke is 7m which is
available to use 6m drill rod
one time.
● Drill rig adopt 4 pieces long jacks which is easy to load the
truck with no crane.
● The drill installed 1.5 ton winch.
● Rotate speed is adjustable which make the drill available for
variety of drill techniques.
● There are two pieces of cylinder on the mast which make the pull
up capacity to 25T.
● Crawler chassis with turning platform system,make it easy and
rapidly to move. Rubber
crawler is optional.
crawler is optional.
● Patent design of telescoping in output shaft will effectively
protect the drilling tools.
● The drill installed a hydraulic clamp & breakout system in
order to automatic wrench
the drill pipes and tools.
● Water Well Hole and geothermal hole.
● Micropile,subway, buildings, airport, and other
deep foundation pit for anchoring.
● Single,double,triple Jet grouting
● The blast hole,the anti-floating anchoring hole .
Multi Functional Full - Hydraulic Drilling Machine With 7m Feeding Stroke
Inquiry Cart
0