Customized Reverse Osmosis Water Treatment System PLC Touch Screen Control

Reverse osmosis water purification system RO water treatment plant

Installation
Raw water pump +quartz sand filter + active carbon filter +ion softener system + micron filter+RO water purifed system + ozone generator

Machine description

1.0 Water feeding pump
Requested access to the system's raw water has a stable flow and pressure, its purpose is to prevent water fluctuations have an impact on the system operation to ensure the stability of the system into the water.

1.1 First stage pretreatment. (Sand filter)
The use of multi-medium quartz sand filters, main purpose is to remove the water contains sediment, manganese, rust, colloid material, mechanical impurities, suspended solids and other particles in the above 20UM of substances hazardous to health. The effluent turbidity is less than 0.5NTU, CODMN less than 1.5mg / L, iron content of less than 0.05mg / L, SDI less than or equal to 5. Water filter is a kind of "physical - chemical" process, the water through granular materials when isolated filter water impurities and colloidal suspensions. Filter is an effective water purification and treatment of the main process in the preparation of pure water is an indispensable process.

1.2 Second stage pretreatment (Carbon filter)
Activated carbon filters used to remove the pigment in the water, smell, a large number of chemical and biological organisms, reducing the residual value of water and pesticide pollution and other harmful pollutants. The structure of activated carbon filters and quartz sand filters, the difference is placed inside the strong adsorption capacity of activated carbon for removal by the quartz sand filter without the filter out organic material, adsorption of residual chlorine in the water, using water more than less than or equal to chlorine 0.1ML/M3, SDI less than or equal to 4, are strong oxidants chlorine, there are various types of membrane damage, in particular, reverse osmosis membranes are more sensitive to chlorine. In addition, the activation process, the surface of activated carbon to form non-crystalline parts of some oxygen-containing functional groups, these functional groups can have a chemical adsorption of activated carbon catalytic oxidation of bad news, to restore the performance, can effectively remove a number of metal ions in water.

1.3 Third stage pretreatment (Resin softener)
Cationic resin used for water softening, primarily to remove hardness of water. The hardness of water is a major calcium (Ca2 +), magnesium (Mg2 +) ion composition, when containing the raw water hardness ions through the resin layer, the water of the Ca2 +, Mg2 + was exchanged resin adsorption, and other objects at the same time the quality of the release of sodium Na + ions flow from the softener in the water is removed from the softened water hardness ions. So as to effectively prevent the reverse osmosis membrane fouling. System can automatically recoil, and so is red.

1.4 Fourth stage pretreatment (Micron filter)
Particle size in water to remove fine particles, sand filters can remove very small colloidal particles in the water, so that the turbidity reached 1 degree, but still per milliliter of water for hundreds of thousands of particle size 1-5 microns colloidal particles, the pressure on this filter to remove water after the particle size of 100 microns or less in small particles, to further reduce the turbidity, to meet the next process of the water requirements of the protection of the next long-running processes.

1.5 Reverse osmosis device

Used to desalt and sterilize the water, used for distill water.

With the pressure difference, the water will pass through the permeable membrane in our reverse osmosis device.
After above process, more than 97% soluble salt and 99% glue, microbe, particulate and organic substances will be separated, extracted, purified and removed from the water.
Our reverse osmosis widely be used in pure water plant, hyper pure water plant, and airspace pure water plant.
Our reverse osmosis device have the character of lower energy consumption, no pollution, physical techniques, high water quality, easy operation and maintenance.
The main parts including pre-filter, filter cartridge, high pressure pump( 1st pass, 2nd pass), membrane housing, RO membrane, low pressure switch, high pressure switch, high pressure gauge, low pressure gauge, TDS meter, flow meter, recycle adjust valve, recycle checking valve, post-pump adjust valve, concentrate adjust valve, inlet solenoid valve, flushing solenoid valve, electrical control.

Welcome to contact us about water treatment equipment in our factory.

Jiangsu Zhongyin Machinery Co., Ltd. is located in Donglai Town, Zhangjiagang City, Jiangsu Province. It has international standard workshop more than 15000 square meters. It is one of the professional beverage packaging machinery manufacturers with collecting research, development and manufacturing. It is China's best beverage machinery equipment suppliers. As liquid packaging industry enterprise, the drink service network is all over the world more than 30 countries and regions, products are widely used in drinks, flavor, cosmetic, beer, milk, and pharmaceutical industries.

Gathering the domestic famous machinery manufacturing enterprise, which have many years' staff more than 60 from machinery, technology and automatic control these 3 fields. It's the strong team of liquid (drink) packaging machinery industry in China, the existing 2 food engineering doctor, 5 masters, 12 senior engineers, can provide users with: Market positioning analysis, designing, engineer training and a set of turnkey solution project and related services.

Modern factory, all kinds of advanced processing equipment and testing equipment, experienced technicians, scientific and strict management, constitute the drink mechanical excellence in product manufacturing system. It also provides Zhongyin Machinery product's quality in the most powerful guarantee.