Customized Sizes Hard Rock Drill Bits Antiwear Run Quickly Crushing Rock

Special Sizes Can Be Customized Hard Rock Drill Bits For Rock Crushing ​

Click here for catalogueTCI DRILL BIT.pdf

What is Hard Rock Drill Bits

Hard Rock Drill Bit - a drilling method that uses a roller bits. In roller-bit drilling, rock is cut by hard-alloy teeth projecting from rolling cutters, which rotate on the drill-bit bearings. Inturn, the drill bit rotates at a high rate, and presses against the bottom hole with a high axial force. The teeth of the rolling cutters roll over the bottom hole and, owing to the large stresses that develop in the area of contact between the teeth and the rock, cut the rock by crushing and chipping. As the hardness of therock increases, the rotation rate decreases and the axial force increases. Destroyed at the mine the rock is removed to the surface by air compressor, mud pump, or a combination of these methods.All bits the above are manufactured according to strict standards, set forth by the American Petroleum Institute (API). And classified according to characteristics set forth by the International Association of Drilling Contractors (IADC).

How to read an IADC Code properly

Common fault analysis of Tricone bits

Working theory of TCI tricone bit

The medium formation TCI tricone bits features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard for mations. The HSN rubber O-ring provides adequate sealing for bearing durability.
Tricone bit is connected with the drill stem and rotates along with it, and drive cones to pressed on the rock. Each cone rotates round the axis of its leg and three cones simultaneously revolve around the bit center. The tungsten carbide inserts on the cone shell cause the formation to spall under the weight on bit and the impact load of cone rotating, the debris will be discharged out to hole by compression air.
The medium formation TCI tricone bits features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard for mations. The HSN rubber O-ring provides adequate sealing for bearing durability.


Advantage:
1. Strictly select the material to ensure the reliable quality. Bad steel and tungsten carbide inserts won't be used.
2. Strictly act according to the ISO9001 standard, and control by full-scale inspection.
3. Sales and support people are highly trained in the latest rock drilling technology and can offer you expert advice on what products will best fit a specific end use application.

Tianying's Best Service
1. 365×24 Year-round Service,We are committed to year-round 24-hour service even during holidays.
1. Provide professional technical services, including products introduction, selecting and problem solution etc.
3. Within 35 Working Days Quick Delivery.


Our Company
Hunan Tianying Drilling Machine Manufacturing Co., Ltd, supplies tricone drill bits, which are widely used in mining drill. Products offers a complete line of tricone bits, which using the best raw material in the market. Reliable steel, tungsten carbide, bearing and lubrication system, size from 7 7/8”(85.7mm) to 26”(660.4mm) for use in all formations, Our Tricone Bits are with Sealed Bearing, Roller Bearing and Gage Protected which can ensure you can drill more meters.

Tianying's Best Service
1. 365×24 Year-round Service,We are committed to year-round 24-hour service even during holidays.
1. Provide professional technical services, including products introduction, selecting and problem solution etc.
3. Within 35 Working Days Quick Delivery.

Professional. Duarable, Efficient, TIANYING TCI Tricone Bit!
Hunan Tianying Drilling Machine Manufacturing Co., Ltd.is one state-appointed factory of mining tools especially for tricone bit. we are established in 1958 and located at Zhuzhou city of Hunan provice. one famous heavy industrial base of China. covering the land area of more than 800 acres with total asset of RMB130 Million and over 100 staffs.

we have advanced full-equipped tricone bits and rockdrilling tillsmanufacturing workshops, high frequency welding workshop.heat treatment workship. mould equipment making workshop and the various departments of measurement. quality control. technology R&D center. the tatal main equipments amount to over 300 sets andthe annual production volume for tricone bits is 5000pcs for other rock drilling tools is over 1400000 pieces.

we have partners all over the world like America. Europe.Australia.South Africa. UAE. Brazil and so on.

To get Tianying TCI Drill Bit news direct, follow us on LinkedIn, Facebook and Twitter.