

Add to Cart
The sfp+ series single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability.
The sfp+ module is designed for single mode fiber and operates at a nominal wavelength of 1270nm or 1330nm; The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.
Feature
Parameter
Parameter | Symbol | Min. | Max. | Unit | Note |
Supply Voltage | Vcc | -0.5 | 4.0 | V | |
Storage Temperature | -40 | 85 | °C | ||
Relative Humidity | 85 | % |
Parameter | Symbol | Min. | Typ | Max. | Unit | Note | |
Data Rate | Ethernet | 10.3125 | Gb/s | ||||
Fiber Channel | 10.518 | ||||||
Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | ||
Vcc | V | ||||||
Supply Current | Icc5 | mA | |||||
Icc3 | 400 | mA | |||||
Operating Case Temp. | Tc | 0 | 70 | °C |
Transmitter
Parameter | Symbol | Min. | Typ | Max. | Unit | Note | |
Diff. input voltage swing | 120 | 820 | mVpp | 1 | |||
Tx Disable input | H | VIH | 2.0 | Vcc+0.3 | V | ||
L | VIL | 0 | 0.8 | ||||
Tx Fault output | H | VOH | 2.0 | Vcc+0.3 | V | 2 | |
L | VOL | 0 | 0.8 | ||||
Input Diff. Impedance | Zin | 100 | Ω |
Receiver
Parameter | Symbol | Min. | Typ | Max. | Unit | Note | |
Diff. output voltage swing | 340 | 650 | 800 | mVpp | 3 | ||
Rx LOS Output | H | VOH | 2.0 | Vcc+0.3 | V | 2 | |
L | VOL | 0 | 0.8 |
Application