15A,240VAC hot runner temperature controller, single zone hot runner PID control system

1 zone hot runner temperature control systems match with single nozzle, standard 5pin connectors

Hot Runner Controller Features:

1. The controller's shape and installation method adopt international standard structure,and it is suitable for any standard controller cabinet.

2. The controller power wiring system and load connection method are standard structures.

3. Each control card controls the heater temperature of one circuit.

4. The controller card is convenient to insert and dial.

5. It is interchangeable with other brand controller card.

6. It is suitable for all hot runner heaters with a load not exceeding 15A.If over 15A,please contact us.

7. OEM is available

8. Variety of models for your choice

Product Specifications:

Function and characteristics:

1. Light-touch key and double row 4 bits LED display mode

2. Simple operation,accurate temperature control

3. Control mode: SSr or PAc

4. FUZZY + PID control algorithm, Automatic or manual setting

5. Connected wrong AC380V,power auto-protection

6. Alarm code & alarm status

Precautions before use hot runner controller:

1. When connecting the power cord, you must connect to the power supply as indicated on the label

2. Check if the mold wiring method matches with the temperature controller wiring method

3. Check the insulation of the heaters are qualified

4. Confirm that the input voltage meets the temperature control box voltage specification

5. It is best to turn off the power switch before powering up

6. After powering up, make sure the fan is working

7. Replace the temperature control card or wiring, do not operate with power

Housing Selection:

Connecting Method:

More information,please contact us anytime.

Wellmade IND. Manufacturing(HK) Ltd is one-stop mold parts procurement service supplier.

We are located in mould town which can offer all kinds of mold parts which meet different customers demand.

10-15 days door to worldwide.

We don't just sell mold parts, we also provide engineering service.

Product ranges:

1. Plastic mold parts: ejector pin, sleeve pin, core pin, guide pin, locking block sets, air poppet valves, spring...

2. Hot runner parts: hot runner manifold,hot runner nozzle body,hot runner nozzle tips and gate bush,valve pin and pin guide bush,hot runner heater and thermocouple,cu-ring and o-ring,hot runner cables and connector box,pneumatic and hydraulic cylinder etc.)

3. Heating elements: coil heaters, copper heaters, cartridge heaters...

4. Tungsten steel milling cutter, CNC tool, handle.....

Lead time: standard parts stock supply, non-standard parts 3-8 working days.