

Add to Cart
Coxial Tube Heat Exchanger
Liquid Flow Rate | 2.09-100m3/h |
Maximum Working Pressure | Refer to details |
Weight | 1-100KGS |
Warranty | 1 Year |
After-sales Service Provided | Field installation, commissioning and training |
Applicable Industries | Manufacturing Plant |
Condition | New |
Place of Origin | Foshan, China (Mainland) |
Brand Name | ECOICE |
Structure | Tube Heat Exchanger |
Voltage | 110V/220V/380V |
Dimension(L*W*H) | 880*450*50mm |
Certification | CCC, CE, ROHS, UL |
Material | Pure titanium tube |
Application | Heat exchanger |
Type | New energy |
Structure Feature
High efficiency
Spiral groove structure can enhance heat transfer on both sides.
The axial flow and spiral rotation flow of the fluid in the tube
will intensify the mixing of the fluid near the tube wall, thus
enhancing the turbulence intensity and increasing the heat transfer
coefficient
Self-cleaning ability
The coaxial heat exchanger has self-cleaning ability because the
fluid spiral flow washes the surface. Coaxial heat exchanger has
stable performance and low attenuation. The cross-section area of
the waterway is large, allowing sediment and large diameter fibers
to pass through without blocking. The water passage is clean
because the inner tube of the spiral groove keeps the flow
turbulent and cleans the surface
Effective prevention of freezing
Water is not easy to freeze because it is turbulent when it flows
at a low speed in a spiral groove. The special spiral groove
structure of the inner tube makes the inner tube flexible to a
certain extent and does not produce the risk of frost cracking.
Less risk of leakage
Heat exchangers are very worried about leakage due to long-term
vibration, pressure fluctuation, alternation of heat and cold, and
so on. The risk of leakage of coaxial exchangers is seldom due to
fewer welding points, simple processing and easy control of welding
quality
Adapt to all kinds working conditions
In the actual operation of refrigeration system, the internal
pressure is often in an alternate state due to temperature
fluctuation, start-stop cycle, heat pump defrosting, expansion
valve regulation and other factors. Spiral coaxial heat exchanger
is more resistant to pressure shock and pressure shock than plate
heat exchanger under constant vibration and pressure change, and
can adapt to the complexity of actual working conditions
Kinds of coaxial heat exchanger that ECOICE design and produce
1 Based on shape
Circle ,Rectangle,Double helix,Spiral,Trombone
2 Based on system No.
Single system,Double helix type 3 systems,Trombone interspersed 2
systems,Trombone type 6 systems,Spiral type 9 systems
3 Based on material
Red copper,Cupronickel (BFe-10-1-1),Titanium,Stainless steel,Steel
Inner tube material
Inner tube material can be: red copper, cupronickel(BFe-10-1-1),
Titanium, Stainless steel. And inner tube can be choosed by smooth
tube or enhanced surface tube. And there are also double-wall
copper inner tube.
Outer tube material
Depending different working condition, outer tube material can be:
steel, red copper, cupro-nickel, titanium, stainless steel etc.
Coaxial heat exchangers with excellent ability for heat exchanging
and adaptation are widely used for:
1. Heat pump water heater condenser
2. Condenser/evaporator for water chiller
3. Condenser for pool heat pump
4. Condenser/evaporator for water(ground) source heat pump
5. Cooler or regenerator for CO2 heat pump air
6. Condenser/evaporator for marine AC
7. Condenser for ice machine
8. Evaporator for water purifier
9. Evaporation or condenser for mariculture constant temperature
machine
10. Condenser for dish washer
Any inquiry or question, feel free to contact us