

Add to Cart
Skid Steer Loader Soil Moving Equipment 67hp Yanmar Engine SWSSL835
Soil Moving Machinery
A skid loader, skid-steer loader or skidsteer is a small,
rigid-frame, engine-powered machine with lift armsused to attach a
wide variety of labor-saving tools orattachments. Skid-steer
loaders are typically four-wheel vehicles with the wheels
mechanically locked insynchronization on each side, and where the
left-sidedrive wheels can be driven independently of the right-side
drive wheels. The wheels typically have noseparate steering
mechanism and hold a fixed straight alignment on thebody of the
machine. Turning is accomplished by differential steering, inwhich
the left and right wheel pairs are operated at different speeds,
andthe machine turns by skidding or dragging its fixed-orientation
wheelsacross the ground. The extremely rigid frame and strong wheel
bearingsprevent the torsional forces caused by this dragging motion
from damagingthe machine. As with tracked vehicles, the high ground
friction produced byskid steers can rip up soft or fragile road
surfaces. They can be convertedto low ground friction by using
specially designed wheels such as theMecanum wheel. Skid-steer
loaders are capable of zero-radius, "pirouette" turning, which
makes them extremely maneuverable and valuable forapplications that
require a compact, agile loader. Skid-steer loaders aresometimes
equipped with tracks instead of the wheels, and such a vehicleis
known as a multi-terrain loader.
Main Features
Delivering unmatched performance, versatility, and ease of
operation, the SINOWAY Skid Steer Loader is ideal for construction,
landscaping and agriculture as well as other key sectors.
Multiple attachments are provided to increase your flexibility,
enabling you to handle many jobs with just the one machine.
Using of simulation technology to learn the mission data at
travelling and working conditions helped optimizing power and fuel
efficiency.
Three-stage nano fuel filter and oil filter extend the service
interval to 500 hours. Under normal maintenance, the engine can run
8000 hours before first overhaul, saving maintenance cost by 25% to
30%.
Engine | |
Engine Model | YANMAR |
Gross Power | 61.3kW(82.6hp)@2400rpm |
Net Power | 57.3kW(76.8hp)@2400rpm |
Peak Torque | 293N·m@1550rpm |
Number of Cylinders | 4 |
Displacement | 3.3L |
Cooling Type | Water |
Main Technical Specification | |
Bucket Capacity | 0.5m³ |
Operating Weight | 3500kg |
Static Tipping Load | 2090kg |
Rated Load | 1045kg |
Boom Breakout Force | 22.0kN |
Bucket Breakout Force | 25.5kN |
Dump Clearance at Full Height Discharge | 2425mm |
Dump Reach at Full Height Discharge | 560mm |
Maximum Dump Angle at Full Height | 39° |
Maximum Hinge Pin Height | 3105mm |
Bucket Rollback at Ground Level | 30° |
Ground Clearance | 210mm |
Angle of Departure | 27° |
Front Clearance Radius | 2000mm |
Service Capacity | |
Fuel Tank | 80 L |
Engine Oil | 10.4 L |
Cooling System | 20 L |
Hydraulic Reservoir | 56 L |
Hydraulic System Total | 60 L |
Chain Tanks, Each | 12 L |
Dimensions | |
Overall Length(with bucket on ground) | 3554mm |
Overall Width | 1720mm |
Overall Height(to the top of cab) | 2025mm |
Wheel Base | 1115mm |
Tread | 1415mm |
Bucket width | 1830mm |
Electrical System | |
System Voltage | 12 V |
Alternator Output | 55 amps |
Hydraulic System | |
System Type | Closed |
Standard Flow | 84.3L/min |
Optional High Flow | 122L/min |
Traveling Hydrostatic Pressure | 32MPa |
Working Hydrostatic Pressure | 20.7MPa |
Hydraulic Cycle Time, total | 8.7s |
Raise | 4.1s |
Dump | 2.4s |
Lower (empty, float down) | 2.2s |
Tires | |
Ply Type | Pneumatic |
Tire Size | 12-16.5 |
Ply Rating | 10 |
Drive Chain Size | 100HS |