

Add to Cart
RS485 Ultrasonic Level Sensor Water Resistant With 1.5s Measure Cycle
Product features
1. Safety: Do not use valves, pipes or joints when measuring toxic, explosive, corrosive, stress, volatile, and leaking liquids. It has no source of leakage and no containers for liquids and gases. very safe. Even if the instrument is damaged or maintained, it will not leak, poison or explode.
2. Hygiene: Do not touch liquids (making wine, beverages, milk production, storage tanks, pipes) in the inspection and monitoring program, and will not cause pollution.
3. Easy installation and maintenance: no fire, no clear box, no impact on production.
Technical Parameters:
(1)Power supply: | DC20~32V |
(2)Output: | DC4~20mA |
(3)Working temperature: | -40℃~+75℃ |
(4)Mode of indication: | 4 digit LCD |
(5)Parameter set up: | 3 induction buttons |
(6)Mode installation: | Whorl, Flange |
(7)Accuracy: | 0.2% Span(in air) |
(8)Beam angle: | 8°, 5° (3db) |
(9)Pressure range: | ±0.1MPa |
(10)Protect grade: | IP67 |
For range of 20m, 30m, 40m, the size of orifice on tank should be more than that of DN200 flange. And the length of the connection pipe under the flange shou
Installation:
For tank:
For range less than 8 m, the size of orifice on tank should be more than of DN65 flange.
For range of 10m an12m, the size of orifice on tank should be more than that of DN100 flange. And the length of the connection pipe under the flange should be less than 20m
For range of 15m, the size of orifice on tank should be more than that of DN150 flange. And the length of the connection pipe under the flange should be less than 20m
For open pond:fixing stand should be needed.
Continuous non-contact level measurement with compact version;