Wave Soldering Temperature Control Module PLC Engineering Temperature Controller Nitong Reflow Soldering Accessories

Wave Soldering Temperature Control Module PLC Engineering Temperature Controller Nitong Reflow Soldering Accessories

Introduction:

A plc temperature control module is a device used to monitor and control temperature. It is usually used with a programmable logic controller (PLC).

process:

1. Sensor selection: First, select a temperature sensor suitable for the application scenario. Commonly used temperature sensors include thermocouples, thermal resistors and semiconductor sensors. These sensors can convert temperature into electrical signals and send them to the temperature control module for processing.

2. Connect the sensor: Connect the selected temperature sensor to the PLC temperature control module. This usually involves connecting the sensor's output pin to the module's input port. Ensure proper wiring according to sensor and module specifications and requirements.

3. Set input parameters: Configure input parameters in the PLC program so that the module can read the temperature signal sent by the sensor. This may include the input port and type (analog or digital), as well as the bias for calibrating or adjusting the sensor.

4. Data collection: Read connected sensors regularly and obtain temperature data. These data will be entered into variables in the PLC program so that subsequent temperature control algorithms can be used.

5. Temperature control algorithm: Implement the temperature control algorithm in the PLC program. These algorithms decide how to adjust the temperature based on the temperature data being read and the target temperature being set. Common control algorithms include proportional-integral-deriva

6. Control output: According to the results of the control algorithm, the PLC will generate a control signal and connect it to the temperature control device (such as a heater or cooler) through the output port. In this way, the control signal will trigger the corresponding operation to achieve the desired temperature regulation

Product Series:

Images:

Shenzhen HanSome Technology Co.,Ltd(HSTECH)was estabilished in 2012 by prefessional and experienced engineer who wroked many years in EMS company,we specilized in PCB handling equipments at first, then we develop the PCB depaneling machine and SMT cleaning machine. HSTECH not only have professional technical team for R&D,but also have a outgoing and experienced marketing team for research and develop, grasps products developing directions, updates the products and technics to meet the continue changing demands. In the past years,we have been always keep innovating and exploing to make cost-efficient products to help our customers saving cost and labor, improving the production efficiency at the same time.
HSTECH set the goal for "High quality and Smart”, that based on the concept of "Quality-Oriented and Customer-orented", and combined the industry feature, smart technology persuit for the smart factory.As for the after-sale service, we insist on "responsibility", we will take reaction at the first when we got quality feedbacks,and service our customers all the time.